Results 1 to 3 of 3

Thread: Moving/home to a separate partition.

  1. #1

    Moving/home to a separate partition.

    Got a new laptop recently and have formatted the 500 GB hard drive as follows: sda1: 2GB Swap. sda2: 16gb, reiserFS, installed Knoppix on it. sda3 the rest, also reiserFs. One feature I missfrom Vanilla Debian was how easy it was to set-up separate root and home partitions, and while simply having sda3 allows me to actually use my internal hardd rive for media storage without needless bloating partimage back-ups of my knoppix install, I would like the seamlessness of making sda3 my home partition. Anyone know how I would go about moving /home over to sda3 and having it automount at /home everytime I boot?

  2. #2
    Okay, did some research and best I can tell, all I should need to do is move the contents of /home to /dev/sda3 and add an appropriate line in /etc/fstab for /dev/sda3. I've done this, and it mostly works, except with one hang-up: /dev/sda3 isn't mounting automatically at boot. Upon a fresh boot, /home is empty and the terminal acts like / is my home directory(it even links ~ to /). Running sudo mount -a mounts /dev/sda3 at /home and after exiting to the Adriane menu and returning to the shell, everything works just fine. here is the relevant line from my /etc/fstab: /dev/sda3 /home reiserfs defaults,auto 0 0 My fstab otherwise remains unaltered from the knoppix default. Any ideas as to what's wrong?

  3. #3
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Hi Jeffery Mewtamer,

    at the end of configuring Knoppix the commands inside the file /mnt-system/$knoppix_dir/knoppix.sh are executed if it exists.

    If you have got an HDD install of Knoppix the directory /mnt-system does not exist. You could simulate its existence by creating a link to your root directory on /dev/sda2.
    Code:
    cd /
    sudo ln -s . mnt-system
    Then you could create a file /KNOPPIX/knoppix.sh containing the command
    Code:
    mount -t reiserfs /dev/sda3 /home
    After reboot the home directory of the user knoppix should be in the right place.

    Regards.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R620 Server | 2x 2680 V2 2.8GHz = 20 Cores | 96GB | 2x 1TB SAS picture

Dell PowerEdge R620 Server | 2x 2680 V2 2.8GHz = 20 Cores | 96GB | 2x 1TB SAS

$338.99



Dell PowerEdge R720 Server | 2x E5-2650 v2 = 16 Cores | 128GB RAM | 4x Trays picture

Dell PowerEdge R720 Server | 2x E5-2650 v2 = 16 Cores | 128GB RAM | 4x Trays

$286.99



Dell PowerEdge R720 Server | 2x 2690 V2 - 3.0GHz - 20 Cores | 128GB | 4TB SAS picture

Dell PowerEdge R720 Server | 2x 2690 V2 - 3.0GHz - 20 Cores | 128GB | 4TB SAS

$573.99



Dell PowerEdge R630 Server - 2x 2680V4 2.4GHz 28 Cores - Choose RAM / Drives picture

Dell PowerEdge R630 Server - 2x 2680V4 2.4GHz 28 Cores - Choose RAM / Drives

$675.99



Dell PowerEdge R620 Server | 2x E5-2650 V2 2.6GHz =16 Cores | 32GB | 2x trays picture

Dell PowerEdge R620 Server | 2x E5-2650 V2 2.6GHz =16 Cores | 32GB | 2x trays

$145.99



Dell Poweredge R620 2x E5-2670 2.6ghz 16-Cores / 32gb / H710 / 2x Trays / 750w picture

Dell Poweredge R620 2x E5-2670 2.6ghz 16-Cores / 32gb / H710 / 2x Trays / 750w

$89.99



Dell PowerEdge R710 Server | 2x X5650 =12 Cores | 32GB RAM | H700 | 2x 300GB SAS picture

Dell PowerEdge R710 Server | 2x X5650 =12 Cores | 32GB RAM | H700 | 2x 300GB SAS

$179.99



Dell PowerEdge R620 Server - 2x 2650 V2 2.6GHz 16 Cores - Choose RAM / Drives picture

Dell PowerEdge R620 Server - 2x 2650 V2 2.6GHz 16 Cores - Choose RAM / Drives

$300.80



Dell PowerEdge R620 Server - 2x E5-2690 v2 3.0GHz 20 Cores - Choose RAM / Drives picture

Dell PowerEdge R620 Server - 2x E5-2690 v2 3.0GHz 20 Cores - Choose RAM / Drives

$339.20



Dell PowerEdge R720 Server | 2x 2670 V2 =20 Cores | 32GB | H710P | 4x 300GB SAS picture

Dell PowerEdge R720 Server | 2x 2670 V2 =20 Cores | 32GB | H710P | 4x 300GB SAS

$211.99