Results 1 to 3 of 3

Thread: Moving/home to a separate partition.

  1. #1

    Moving/home to a separate partition.

    Got a new laptop recently and have formatted the 500 GB hard drive as follows: sda1: 2GB Swap. sda2: 16gb, reiserFS, installed Knoppix on it. sda3 the rest, also reiserFs. One feature I missfrom Vanilla Debian was how easy it was to set-up separate root and home partitions, and while simply having sda3 allows me to actually use my internal hardd rive for media storage without needless bloating partimage back-ups of my knoppix install, I would like the seamlessness of making sda3 my home partition. Anyone know how I would go about moving /home over to sda3 and having it automount at /home everytime I boot?

  2. #2
    Okay, did some research and best I can tell, all I should need to do is move the contents of /home to /dev/sda3 and add an appropriate line in /etc/fstab for /dev/sda3. I've done this, and it mostly works, except with one hang-up: /dev/sda3 isn't mounting automatically at boot. Upon a fresh boot, /home is empty and the terminal acts like / is my home directory(it even links ~ to /). Running sudo mount -a mounts /dev/sda3 at /home and after exiting to the Adriane menu and returning to the shell, everything works just fine. here is the relevant line from my /etc/fstab: /dev/sda3 /home reiserfs defaults,auto 0 0 My fstab otherwise remains unaltered from the knoppix default. Any ideas as to what's wrong?

  3. #3
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Hi Jeffery Mewtamer,

    at the end of configuring Knoppix the commands inside the file /mnt-system/$knoppix_dir/knoppix.sh are executed if it exists.

    If you have got an HDD install of Knoppix the directory /mnt-system does not exist. You could simulate its existence by creating a link to your root directory on /dev/sda2.
    Code:
    cd /
    sudo ln -s . mnt-system
    Then you could create a file /KNOPPIX/knoppix.sh containing the command
    Code:
    mount -t reiserfs /dev/sda3 /home
    After reboot the home directory of the user knoppix should be in the right place.

    Regards.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8 picture

IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8

$479.96



Red Hat Enterprise Linux 5 Server - New and Sealed picture

Red Hat Enterprise Linux 5 Server - New and Sealed

$19.99



Red Hat Enterprise Linux 5 Server RHF032US-R1 NEW Sealed picture

Red Hat Enterprise Linux 5 Server RHF032US-R1 NEW Sealed

$59.95



Asus ESC4000 G3 Barebones 0GB HDD Linux picture

Asus ESC4000 G3 Barebones 0GB HDD Linux

$200.00



2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD picture

2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD

$30.00



IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E picture

IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E

$799.96



1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports picture

1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports

$149.00



IBM Power 9 S922 8-Core 3.4-3.9Ghz 128Gb DDR4 2U Linux Server - 9009-22a picture

IBM Power 9 S922 8-Core 3.4-3.9Ghz 128Gb DDR4 2U Linux Server - 9009-22a

$3439.96



IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE picture

IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE

$199.87



POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives picture

POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives

$179.99