-
Moving/home to a separate partition.
Got a new laptop recently and have formatted the 500 GB hard drive as follows: sda1: 2GB Swap. sda2: 16gb, reiserFS, installed Knoppix on it. sda3 the rest, also reiserFs. One feature I missfrom Vanilla Debian was how easy it was to set-up separate root and home partitions, and while simply having sda3 allows me to actually use my internal hardd rive for media storage without needless bloating partimage back-ups of my knoppix install, I would like the seamlessness of making sda3 my home partition. Anyone know how I would go about moving /home over to sda3 and having it automount at /home everytime I boot?
-
Okay, did some research and best I can tell, all I should need to do is move the contents of /home to /dev/sda3 and add an appropriate line in /etc/fstab for /dev/sda3. I've done this, and it mostly works, except with one hang-up: /dev/sda3 isn't mounting automatically at boot. Upon a fresh boot, /home is empty and the terminal acts like / is my home directory(it even links ~ to /). Running sudo mount -a mounts /dev/sda3 at /home and after exiting to the Adriane menu and returning to the shell, everything works just fine. here is the relevant line from my /etc/fstab: /dev/sda3 /home reiserfs defaults,auto 0 0 My fstab otherwise remains unaltered from the knoppix default. Any ideas as to what's wrong?
-
Senior Member
registered user
Hi Jeffery Mewtamer,
at the end of configuring Knoppix the commands inside the file /mnt-system/$knoppix_dir/knoppix.sh are executed if it exists.
If you have got an HDD install of Knoppix the directory /mnt-system does not exist. You could simulate its existence by creating a link to your root directory on /dev/sda2.
Code:
cd /
sudo ln -s . mnt-system
Then you could create a file /KNOPPIX/knoppix.sh containing the command
Code:
mount -t reiserfs /dev/sda3 /home
After reboot the home directory of the user knoppix should be in the right place.
Regards.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 32GB | P204I | 2x900GB 10KRPM
$1499.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant BL460c Gen9 Blade 2x E5-2660v3 2.6GHz =20 Cores 64GB P246 650FLB
$196.00