Results 1 to 3 of 3

Thread: Moving/home to a separate partition.

  1. #1

    Moving/home to a separate partition.

    Got a new laptop recently and have formatted the 500 GB hard drive as follows: sda1: 2GB Swap. sda2: 16gb, reiserFS, installed Knoppix on it. sda3 the rest, also reiserFs. One feature I missfrom Vanilla Debian was how easy it was to set-up separate root and home partitions, and while simply having sda3 allows me to actually use my internal hardd rive for media storage without needless bloating partimage back-ups of my knoppix install, I would like the seamlessness of making sda3 my home partition. Anyone know how I would go about moving /home over to sda3 and having it automount at /home everytime I boot?

  2. #2
    Okay, did some research and best I can tell, all I should need to do is move the contents of /home to /dev/sda3 and add an appropriate line in /etc/fstab for /dev/sda3. I've done this, and it mostly works, except with one hang-up: /dev/sda3 isn't mounting automatically at boot. Upon a fresh boot, /home is empty and the terminal acts like / is my home directory(it even links ~ to /). Running sudo mount -a mounts /dev/sda3 at /home and after exiting to the Adriane menu and returning to the shell, everything works just fine. here is the relevant line from my /etc/fstab: /dev/sda3 /home reiserfs defaults,auto 0 0 My fstab otherwise remains unaltered from the knoppix default. Any ideas as to what's wrong?

  3. #3
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    Hi Jeffery Mewtamer,

    at the end of configuring Knoppix the commands inside the file /mnt-system/$knoppix_dir/knoppix.sh are executed if it exists.

    If you have got an HDD install of Knoppix the directory /mnt-system does not exist. You could simulate its existence by creating a link to your root directory on /dev/sda2.
    Code:
    cd /
    sudo ln -s . mnt-system
    Then you could create a file /KNOPPIX/knoppix.sh containing the command
    Code:
    mount -t reiserfs /dev/sda3 /home
    After reboot the home directory of the user knoppix should be in the right place.

    Regards.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


ADAPTEC ASR-71605 SFF8643 16 PORT SAS SATA 6Gb/s HBA/RAID CARD High Profile picture

ADAPTEC ASR-71605 SFF8643 16 PORT SAS SATA 6Gb/s HBA/RAID CARD High Profile

$45.00



ADAPTEC ASR-7805 6Gbps SAS SATA PCI EXPRESS RAID CONTROLLER CARD Tested/Working picture

ADAPTEC ASR-7805 6Gbps SAS SATA PCI EXPRESS RAID CONTROLLER CARD Tested/Working

$12.50



9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US picture

9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US

$52.88



Dell Perc H810 VV648 Dual-Port 6Gbps Raid Controller Half Height Bracket picture

Dell Perc H810 VV648 Dual-Port 6Gbps Raid Controller Half Height Bracket

$49.99



LSI LSI00194 9211-8I 6Gb/s 8-Ports PCIe x8 SAS RAID picture

LSI LSI00194 9211-8I 6Gb/s 8-Ports PCIe x8 SAS RAID

$32.95



Dell PERC H310 PCI-E SAS SATA Raid Controller 0HV52W HV52W  picture

Dell PERC H310 PCI-E SAS SATA Raid Controller 0HV52W HV52W

$23.79



LSI 9210-8i 6Gbps SAS SATA 8 Ports HBA PCI-E RAID Controller Card US seller picture

LSI 9210-8i 6Gbps SAS SATA 8 Ports HBA PCI-E RAID Controller Card US seller

$36.88



DELL PERC H700 1GB RAID CONTROLLER for POWEREDGE R610 R710 R810 R910 CNXVV picture

DELL PERC H700 1GB RAID CONTROLLER for POWEREDGE R610 R710 R810 R910 CNXVV

$27.99



Dell PERC H310 Mini Mono Modular SAS/SATA RAID Controller Card 6Gb/s K09CJ picture

Dell PERC H310 Mini Mono Modular SAS/SATA RAID Controller Card 6Gb/s K09CJ

$12.99



HP P410 512MB 462919-001 Smart Array SAS RAID Controller Card BBWC picture

HP P410 512MB 462919-001 Smart Array SAS RAID Controller Card BBWC

$6.99