Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Updating or not?

Hybrid View

  1. #1

    Updating or not?

    Thank you for this great forum.
    I am from Spain and I have some doubts about if it's possible or not to update some programs included with knoppix. I am interested to always update to the latest packages or new versions of Chromium and Iceweasel, is it possible without breaking Knoppix?, must I change the apt sources.lists to different lines?
    Thank you all for your support.
    Jose

  2. #2
    I've been running the latest iceweasel from Debian Testing and have never had an issue with an upgrade. Then again, I'm running an extremely stripped down knoppix and there may be something in vanilla Knoppix that would interfere with keeping Iceweasel up-to-date. Regarding Apt configuration: The default Knoppix sources.list includes, among others, both Debian Stable and Debian Testing, along with Knoppix's own repository. You might want to clean it up some, but leaving it as the default shouldn't cause any problems. What might cause problems is a line in /etc/apt/apt.conf.d/00 knoppix(filename typed from memory, maybe slightly off) which sets the default realese for apt. By default, the line in question looks like: apt::default-release "squeeze"; In Knoppix 4.2.0. Squeeze is presentally Debian Oldstable, which isn't in the sources.list, and most APT frontends will throw an error and refuse to function if there isn't a matching sources.list line for the default release. if you change squeeze to jessie(for Debian Stable) or stretch(for Debian Testing), this problem will be fix. This line acts as a limiter to what updates will be installed. If you remove or comment out this line, your package manager will prefer the version with the highest version number regardless of it's source, while if this line is present, your package manager will prefer the version for the designated release unless the installed version is already of a higher release number. In other words, if the default-release is set to Debian Stable, updates from Debain Testing or Knoppix will only be installed if you force them or you're already running a version that looks newer than the version in Stable. Note: I may have gotten squeeze and wheezy mixed up(one is presently Debian oldstable, the other Debian oldoldstable), but in either case, you'll want to change it to Jeesy or stretch depending on whether you want Debian Stable or Debian Testing as your default release. I hope this helps.

  3. #3
    Thank you very much!Now, when trying to update it seems I should update all the packages from knoppix por something like that. Maybe this mix of versions in knoppix (stable, testing...) make things more difficult to update with some security and not breaking the o.s., but it's also what makes it so great. So, I am a bit loss about what to do...My preference would be an usb o.s. as fast as knoppix with the option to update some important programs like the browser and security problems. Now I use Firefox downloaded manually. I have tried to update chromium or install chrome without success. I love knoppix and I don't know if this is posible, even paying for it.

  4. #4
    Hello Jeffery, I changed 00knoppix to jessie, I made an apt-get update and then upgrade, and knoppix needs 1500 MB to upgrade. I am testing it just now. How is your knoppix?, is it modified?, have you deleted many programs?. I only need a knoppix with the minimal programs and being updated. Maybe I am asking too much. If you or anyone in this forum can help please I am listening. Thanks a lot

  5. #5
    It has been nearly a year since the last public release of Knoppix, which coupled with a new stable release of Debian earlier this year means just about every package included in Knoppix is an old version. When I did a clean install on my new laptop(since using partimage to clone my old laptop's root partition didn't work), it took me most of a weekend just to do the most basic of my customizations(namely, marking every package as automatically installed and going through Aptitude's auroremove list to mark stuff I need as manually installed, and upgrading packages left by the big purge who would upgrade without Aptitude complaining, and even that much is beyond what I could in good conscious recommend to a newbie). Given the large number of packages in 7.4.2 that are out-of-date, unless you really know what you are doing, you might be better off sticking with the older versions and wait until 7.6 comes out to try an install that is kept up-to-date. If you do try either upgrading everything that is installed or purging stuff you don't need, I'd recommend doing it in phases rather than all at once. Also, for what it's worth, I'm pretty sure the default version of Iceweasel is already a newer version than the one found in Jessy(the pre-installed version being 32.something whereas Jessy runs 31.something(granted, I think Iceweasel 31 is a long term support version while Iceweasel 32 is a minor release, so the version in Jessie might have more security fixes).

  6. #6
    Thank you very much Jeffery.

  7. #7
    Well,
    I tried and I didn't get it, a lot of problems updating and yes: I tried many different options.
    I surrender, it's a nightmare!
    Thank you all anyway.

  8. #8
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    You can update but not upgrade Knoppix.
    Harddrive Installation → Warning

    And have a look at Debian release changed

  9. #9
    Quote Originally Posted by Werner P. Schulz View Post
    You can update but not upgrade Knoppix. Harddrive Installation → Warning And have a look at Debian release changed
    Thank you Werner, I will take a look and read it.

  10. #10
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Some people will say yes, some will say no. I do not consider myself a Linux expert but I've been around this forum a long time and watched Knoppix evolve from its first public release. In my unenlightened opinion the issue is that Knoppix is not made from a pure Debian release but rather from a mix of "stable", "unstable"(but still more stable than anything Microsoft sells to the public), and "testing" releases. Since many packages in Linux have inter-dependencies, this can be a tricky issue that can cause problems. Klaus has supposedly tested this mix for conflicts (although it is doubtful that he can ever expect to catch everything), but when you revise some of the programs you can introduce new dependency issues. It often still works, but you increase your chances of introducing problems.

    The Debian philosophy is to stick within one single release (I personally prefer unstable and have always found it very stable, I would only use the older official "stable" release for things like servers in mission critical 24/7/365 applications). There can always be bugs and things that testing never caught, but this greatly reduces the chances for bad interactions between packages.

    What I don't understand is, why would you want to treat Knoppix as if it was a distribution? Your having asked the question shows that you understand there are some issues. Why not just install and use Debian, the Linux that Knoppix is built on? Knoppix is a great Live DVD, but I don't understand what people think they get from Knoppix that they don't get from a distribution that is intended to be installed and then run from hard disk and updated and upgraded. Is it simply that Knoppix is the first Linux that you saw and you refuse to consider other options?
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM S822LC 8335-GCA Power 8 2U Server 2xPower8 TESTED picture

IBM S822LC 8335-GCA Power 8 2U Server 2xPower8 TESTED

$695.00



IBM 8203-E4A pSeries 520 6-Bay Server System Power6 2 Core 4.2GHz 4GB No HD picture

IBM 8203-E4A pSeries 520 6-Bay Server System Power6 2 Core 4.2GHz 4GB No HD

$240.00



IBM System X3650 M4 Server 2x Xeon  32 GB RAM NO HDD NO OS picture

IBM System X3650 M4 Server 2x Xeon 32 GB RAM NO HDD NO OS

$215.00



IBM 520 8203-E4A Power Systems Server PowerPC Dual-Core 4.2GHZ 16GB SEE NOTES picture

IBM 520 8203-E4A Power Systems Server PowerPC Dual-Core 4.2GHZ 16GB SEE NOTES

$240.00



IBM System x3650 M3 7945AC1 Server INTEL XEON E5620 2.4GHz 4GB picture

IBM System x3650 M3 7945AC1 Server INTEL XEON E5620 2.4GHz 4GB

$59.00



IBM EServer Xseries 220 Desktop picture

IBM EServer Xseries 220 Desktop

$160.00



IBM X3200 M3 Tower Server Intel Xeon X3450 2.67GHz 2GB 2*500 Gb Hdd Linux AS IS picture

IBM X3200 M3 Tower Server Intel Xeon X3450 2.67GHz 2GB 2*500 Gb Hdd Linux AS IS

$60.00



Lenovo x3550 M5 Server - 180Gb SSD/3x300Gb SAS, 64GB Ram, 2x 8c CPUs, Proxmox picture

Lenovo x3550 M5 Server - 180Gb SSD/3x300Gb SAS, 64GB Ram, 2x 8c CPUs, Proxmox

$240.00



IBM x3650 M3, 7945-AC1, 40GB, XEON e5507, 2.26ghz x2 with RAID Card, No HDD picture

IBM x3650 M3, 7945-AC1, 40GB, XEON e5507, 2.26ghz x2 with RAID Card, No HDD

$149.40



IBM QRadar xx29 M4 2x Xeon E5-2670 2.6GHz 16-Cores | 64gb | M5120 RAID picture

IBM QRadar xx29 M4 2x Xeon E5-2670 2.6GHz 16-Cores | 64gb | M5120 RAID

$299.99