It's the way to get the the function "start_services" running in the background → "&".
Hi
I'm looking at the following command in the /etc/init.d/knoppix-autoconfig boot script:
( start_services & ) >/dev/tty"$LOG_CONSOLE" 2>&1 # Not in job list
It is in the context of
# Start services (especially /etc/rc.local) in background
addtask "bg"; addprogress "Starting background services..."
( start_services & ) >/dev/tty"$LOG_CONSOLE" 2>&1 # Not in job list
The "start_services" is a function within the "knoppix-autoconfig" script.
Could you tell me what the significance is of putting the "start_services &"
WITHIN A SUBSHELL (the (...) brackets)?
It's the way to get the the function "start_services" running in the background → "&".
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.34
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.11
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00