-
krandrtray as part of boot up
Just curious how I can get krandrtray to come up when I boot up. This allows multiple screens. In my case it my tv which has a VGA port.
I need it so I can automatically connect my tv to the laptop without manually entering krandrtray to configure it every time I reboot.
Thanks!
-
Hi, there:
It should be quite feasible to clone the output of LVDS to VGA port automatically during the start-up of X windows. An example script can be found under the section of "Now automate it on login" on the following web page: http://www.thinkwiki.org/wiki/Xorg_RandR_1.2 .
I haven't tried out the script myself as I have already purged 99.99% of the KDE stuff out my knoppix box. But I have a good feeling about it so long as the external monitor is powered on and connected to the laptop before the X11 starts. By the way, a bit of trial-and-error is more likely inevitable if spanning the desktop across multiple monitors is on the to-do list.
ATB,
-
Thank you so much for the link!!
All you guys on the forum are awesome. Love knoppix!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
LSI 9271-8i MegaRAID 8-Port 6Gbps PCIe RAID Controller w/ 1Gb CacheVault & BBU
$30.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99