Results 1 to 4 of 4

Thread: Run Schulz Remaster script.

  1. #1
    Junior Member
    Join Date
    Oct 2015
    Posts
    11

    Run Schulz Remaster script.

    Sorry I'm having problems guys. I'm not working from a virtual machine either. In my understanding I'm to begin installing knoppix 7.4.2 in HD mode to the 32G flashdrive, but only install the boot loader and the mbr before rebooting. Then install the Schulz Remaster script. Then continue with the hd install: insert the knoppix 7.4.2 dvd, and click '/usr/sbin/kn-remaster.sh to open the script for the GUI window.

    But the script won't open, neither in terminal or execute mode. And I don't understand how to control the install for only the bootloader and the mbr before rebooting, so I must have seriously confused the instructions. I'm sure grateful for your help. I did a remaser without the script, but it only copied the default iso, and the changes that I wanted were simply added in an overlay file. It worked the way I wanted it to ok, but woun't recopy correctly. (It reverts to the default 7.4.2 iso when dd copied).Remastering is a great concept though Werner, it's crucial to have backup flashdrive Operating Systems built specially for the purpose whenever it's needed. God bless Knoppix guys. Thanks.

    david

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Hello David!
    In my understanding I'm to begin installing knoppix 7.4.2 in HD mode to the 32G flashdrive, but only install the boot loader and the mbr before rebooting.
    You need a full HD install of Knoppix to your flashdrive and the install of GRUB bootloader to MBR.

    After reboot and start of the BIOS routine take care to select the flashdrive, not your internal HD. Now you can go on with
    → After restart install my script-package with "dpkg -i".

    Greetings Werner

  3. #3
    Junior Member
    Join Date
    Oct 2015
    Posts
    11
    I'm unable to install grub to the mbr Werner.
    I installed knoppix 7.4.2 to a 32g flashdrive in HD mode according to instructions.
    But when I enter: #grub-install /dev/sda. (I get) "grub-probe error: cannot find a device for / (is /dev mounted)".
    #mount /dev/sda /mnt (says it's already mounted or /mnt busy).
    And it says exactly the same for #grub-install /dev/sda1 (and for) #mount /dev/sda1 /mnt).
    So it can't find the mbr.
    #blkid (calls) /dev/zram0 (and calls) /dev/cloop0. So I guess that means the mbr is a cloop file Werner, and has to be edited while decompressed? Or does the Schulz Remaster script provide that function by doing it a differnt way?
    Sorry I'm unable to see the answer here Werner.

  4. #4
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    If you use
    http://knoppix.net/wiki/Category:Har...ion#HD_install
    step by step, you'll be asked before the end of the HD installation where to install GRUB. You have only to do the right decision! You don't need to install GRUB manually.

    When you reboot your new HD install (done by the Knoppix script) you can start whith remaster using my script.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile picture

Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile

$19.99



SFP-10G-LR Compatible 10GBase-LR SFP+ LR Transceiver 10G 1310nm SMF up ot 10km picture

SFP-10G-LR Compatible 10GBase-LR SFP+ LR Transceiver 10G 1310nm SMF up ot 10km

$45.00



Lot of 2 - Dell Intel X520-DA2 2x 10GB SFP+ PCIe Ethernet Network Adapter 942V6 picture

Lot of 2 - Dell Intel X520-DA2 2x 10GB SFP+ PCIe Ethernet Network Adapter 942V6

$53.99



GENUINE CISCO 25G Base Active Optical SFP cable 3M SFP-25G-AOC3M NEW SHIPS FREE picture

GENUINE CISCO 25G Base Active Optical SFP cable 3M SFP-25G-AOC3M NEW SHIPS FREE

$65.99



F5 Networks 10GB OPT-0016-00 F5-UPG-SFP+-R 10GBASE/SR SFP Transceiver picture

F5 Networks 10GB OPT-0016-00 F5-UPG-SFP+-R 10GBASE/SR SFP Transceiver

$4.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$18.00



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



Mellanox Original MFM1T02A-SR 10GbE 10GBASE-SR SFP+ Transceiver picture

Mellanox Original MFM1T02A-SR 10GbE 10GBASE-SR SFP+ Transceiver

$9.00



10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module picture

10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module

$85.00



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$6.80