Results 1 to 4 of 4

Thread: Run Schulz Remaster script.

  1. #1
    Junior Member
    Join Date
    Oct 2015
    Posts
    11

    Run Schulz Remaster script.

    Sorry I'm having problems guys. I'm not working from a virtual machine either. In my understanding I'm to begin installing knoppix 7.4.2 in HD mode to the 32G flashdrive, but only install the boot loader and the mbr before rebooting. Then install the Schulz Remaster script. Then continue with the hd install: insert the knoppix 7.4.2 dvd, and click '/usr/sbin/kn-remaster.sh to open the script for the GUI window.

    But the script won't open, neither in terminal or execute mode. And I don't understand how to control the install for only the bootloader and the mbr before rebooting, so I must have seriously confused the instructions. I'm sure grateful for your help. I did a remaser without the script, but it only copied the default iso, and the changes that I wanted were simply added in an overlay file. It worked the way I wanted it to ok, but woun't recopy correctly. (It reverts to the default 7.4.2 iso when dd copied).Remastering is a great concept though Werner, it's crucial to have backup flashdrive Operating Systems built specially for the purpose whenever it's needed. God bless Knoppix guys. Thanks.

    david

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Hello David!
    In my understanding I'm to begin installing knoppix 7.4.2 in HD mode to the 32G flashdrive, but only install the boot loader and the mbr before rebooting.
    You need a full HD install of Knoppix to your flashdrive and the install of GRUB bootloader to MBR.

    After reboot and start of the BIOS routine take care to select the flashdrive, not your internal HD. Now you can go on with
    → After restart install my script-package with "dpkg -i".

    Greetings Werner

  3. #3
    Junior Member
    Join Date
    Oct 2015
    Posts
    11
    I'm unable to install grub to the mbr Werner.
    I installed knoppix 7.4.2 to a 32g flashdrive in HD mode according to instructions.
    But when I enter: #grub-install /dev/sda. (I get) "grub-probe error: cannot find a device for / (is /dev mounted)".
    #mount /dev/sda /mnt (says it's already mounted or /mnt busy).
    And it says exactly the same for #grub-install /dev/sda1 (and for) #mount /dev/sda1 /mnt).
    So it can't find the mbr.
    #blkid (calls) /dev/zram0 (and calls) /dev/cloop0. So I guess that means the mbr is a cloop file Werner, and has to be edited while decompressed? Or does the Schulz Remaster script provide that function by doing it a differnt way?
    Sorry I'm unable to see the answer here Werner.

  4. #4
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    If you use
    http://knoppix.net/wiki/Category:Har...ion#HD_install
    step by step, you'll be asked before the end of the HD installation where to install GRUB. You have only to do the right decision! You don't need to install GRUB manually.

    When you reboot your new HD install (done by the Knoppix script) you can start whith remaster using my script.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$8.90



New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC, US Shipping picture

New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC, US Shipping

$16.90



New Cisco GLC-TE 1000BASE-T SFP Copper RJ-45 Transceiver Module, US Shipping picture

New Cisco GLC-TE 1000BASE-T SFP Copper RJ-45 Transceiver Module, US Shipping

$25.00



GLC-T Original Cisco 1000BASE-T RJ-45 SFP+ 30-1410-03 30-1410-04 MINI-GBIC picture

GLC-T Original Cisco 1000BASE-T RJ-45 SFP+ 30-1410-03 30-1410-04 MINI-GBIC

$16.40



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



New Cisco SFP-10G-SR-S 10GBASE-SR SFP+ Module 850nm 300m LC MMF DOM, US Shipping picture

New Cisco SFP-10G-SR-S 10GBASE-SR SFP+ Module 850nm 300m LC MMF DOM, US Shipping

$25.00



NEW Sealed Cisco SFP-10G-LR SFP TRANSCEIVER MODULE 10GB V02 SAME DAY SHIPPING picture

NEW Sealed Cisco SFP-10G-LR SFP TRANSCEIVER MODULE 10GB V02 SAME DAY SHIPPING

$31.00



Cisco DS-SFP-FC16G-SW 16 Gbps Fibre Channel SW SFP 10-2666-01 picture

Cisco DS-SFP-FC16G-SW 16 Gbps Fibre Channel SW SFP 10-2666-01

$22.00



NEW Sealed Original CISCO GLC-SX-MMD  SFP TRANSCEIVER MODULE GBIC *US Shipping* picture

NEW Sealed Original CISCO GLC-SX-MMD SFP TRANSCEIVER MODULE GBIC *US Shipping*

$15.00



Genuine Cisco GLC-SX-MMD 1000Base-SX SFP Transceiver Module picture

Genuine Cisco GLC-SX-MMD 1000Base-SX SFP Transceiver Module

$7.25