-
Senior Member
registered user
A built-in wifi scanning command you can add to Knoppix
.
If you would like to know what the wifi environment looks like where you are,
here's a little command-line way to display who's on which channel and how strong
they are relative to your own wifi.
You can easily try this out _temporarily_ by typing in the following line into
a Knoppix lxterminal:
Code:
alias wifi.scan='nmcli -p dev wifi list'
And, <enter>, of course. Then when you <enter> 'wifi.scan',
what you get may look like the following if you have a lot of yuppies with Ipads
and Kindles and Window computers and wireless printers in your neighborhood:
Code:
====================================================================================
Wi-Fi scan list (wlan0)
====================================================================================
* SSID MODE CHAN RATE SIGNAL BARS SECURITY
------------------------------------------------------------------------------------
WARnet Infra 11 54 Mbit/s 25 ▂___ WPA1 WPA2
-- Infra 6 54 Mbit/s 24 ▂___ WPA2
xfinitywifi Infra 6 54 Mbit/s 25 ▂___ --
LivingBrook Infra 6 54 Mbit/s 25 ▂___ WPA2
HOME-B0C2 Infra 6 54 Mbit/s 27 ▂___ WPA1 WPA2
LivingBrook-Guest Infra 6 54 Mbit/s 27 ▂___ --
-- Infra 6 54 Mbit/s 22 ▂___ WPA1 WPA2
xfinitywifi Infra 6 54 Mbit/s 20 ▂___ --
walters Infra 6 54 Mbit/s 19 ▂___ WPA1 WPA2
H89L2 Infra 6 54 Mbit/s 19 ▂___ WPA2
WARnet Infra 1 54 Mbit/s 25 ▂___ WPA1 WPA2
* MyWiFi Infra 6 54 Mbit/s 62 ▂▄▆_ WPA2
FiOS-9IX5R Infra 11 54 Mbit/s 20 ▂___ WPA2
FiOS-JHVGZ Infra 1 54 Mbit/s 25 ▂___ WPA2
FiOS-E9IHZ Infra 11 54 Mbit/s 17 ▂___ WPA2
HP-Print-57-Officejet Pro 8600 Infra 11 54 Mbit/s 20 ▂___ --
STRIPES Infra 11 54 Mbit/s 25 ▂___ WPA1 WPA2
snarfle Infra 11 54 Mbit/s 19 ▂___ WPA2
Basement Infra 11 54 Mbit/s 20 ▂___ WPA1 WPA2
87CX5 Infra 3 54 Mbit/s 22 ▂___ WEP
I add the one line, wifi.scan='nmcli -p dev wifi list', to my executable .bashrc
file to make wifi.scan a _permanent_ built-in capability.
If you don't already have a .bashrc file, then make one and do chmod +x
to make it executable. Try it, you may like it.
This all presumes your wifi supports scanning. My wifi is a $20 replacement unit,
so this capability my very well be present in other inexpensive computers like mine.
-
This is brilliant utu. I just tried this and it works great. What do the Channels mean though?
-
Administrator
Site Admin-
Channels indicate the actual frequency that a wifi device is using, This is not really Knoppix or even Linux related, you can study wifi a bit more to understands it. There are a number of channels (differs by country) but they overlap significantly, so there isn't really as much space as it might seem. Knowing what channels are in use in your location may help you set up a new router or access point on a less crowded frequency, but it is not critical for the average user to understand channels to use wifi.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
Senior Member
registered user
Using nmcli to assess the wifi neighborhood
.
I ran across a very useful linux command with which to query NetworkManager
via command line to assess the situation in one's wifi neighborhood. This
command is nmcli. With only a few parameters nmcli will divulge a
whole lot about your wifi situation vis-a-vis your immediate wifi neighbors.
If your wifi is up and running, you don't even need to tell nmcli what your
own ESSID and channel number are; it already knows. The command nmcli dev wifi
tells you all you need to know in very short order.
Now, in the US, on the 2.4 GHz band, there are 11 adjacent wifi channels, but
it is assumed that a single user might best utilize only channels 1, 6 or 11;
and of these, choose that single channel which allows the maximum difference
in received signal relative to other users on this same channel.
A little sorting of the total environment result for each of the three
special channels may help in making your final selection from among Channels
1, 6 and 11. I have developed a small bash utility which will display your
signal situation relative to your wifi neighbors called skan*, with four
parameter choices: all, 1, 6 or 11. These choices should help you asses what
your best channel choice might be from among the three choices 1, 6 or 11.
*I use the name skan rather than scan to differentiate this utility from
the program /usr/bin/scan already a part of Knoppix 7.6.
If some neighbor uses another channel than 1, 6 or 11, the choice 'all'
will show his situation, but you probably still should choose from among
1, 6 and 11. Looking at these three channels individually may make it
easier to see what your best situation might be.
I find it convenient to group small bash programs together in /home/knoppix/.bashrc
rather than making individual 'crunch-bang' programs of them. The following
excerpts show how the function skan fits within the .bashrc that I use.
Code:
# Beginning of .bashrc utilities for Knoppix 7.6 LiveUSBs. 03/14/16
#
# Note: Save this file as /home/knoppix/.bashrc with its ownership
# chown knoppix:knoppix and make it executable with chmod +x.
#
# SNIP ( other aliases may go here )
#
############################## wifi scan utility start ##############################
alias nl="echo -e '\r'" ;
alias NMCLI='nmcli dev wifi' ; alias wterm='lxterminal --geometry=90x38'
alias ALL="NMCLI | grepx -v '*'" # Actually all but SSID & ESSID
alias heading="date +'at '%l:%M' '%P' '%Z' on '%x; nl; NMCLI | grep '*'"
skan() { # Shows local wifi situation; uses $1 to choose among Channels 1,6,11 & all.
clear; nl; case $1 in
all) echo -e "ESSID plus \c"; echo -e 'all-channel\c' ; \
echo -e ' wifi activity, \c'; heading; ALL ;;
1|6|11) echo -e "ESSID plus \c"; echo -e 'Channel-'$1'\c'; \
echo -e ' wifi activity, \c'; heading; ALL | grepx -w $1 ;;
*) echo -e "Expected input is 'skan Channel'
where Channel is 1, 6, 11 or all.
If a wider or taller terminal display is needed, use wterm." ;;
esac; nl
}
################################ wifi scan utility end ##############################
#
#SNIP ( other functions may go here )
#
# Copyright 2016 by TJ Hoye, License GPL Version 2
# End of .bashrc utilities for Knoppix 7.6 LiveUSBs.
Using this utility assumes that NetworkManager is installed and working, and that
your wifi has a scanning capability. My built-im $20 Broadcom wifi has this capability
so I assume this is not some exotic situation.
I hope some of you will try this out for yourselves and give me some feedback on this.
-
Senior Member
registered user
My apologies.
.
In the excerpted .bashrc in post 4, there is an unfortunate omission.
You will either need to change the grepx reference to grep,
or add the missing alias for grepx which is:
alias grepx='grep -i --color'.
Either correction should suffice, but grepx is a little more interesting, IMO.
Also, there's already a convenient spot for this alias on the line which now reads:
alias nl="echo -e '\r'" ;
which includes an otherwise unnecessary semi-colon.
In any event, don't omit the semi-colon if the two aliases are on the same line.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco CP-8821-K9 Wireless IP VoIP Phone WITH BATTERY
$194.99
"LOT OF 4" Cisco CP-8841 IP Phone Color VoIP PoE CP-8841-K9 w/Stand TESTED
$77.99
Yealink W56H HD DECT Expansion Handset for Cordless VoIP Phone
$65.69
Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black
$29.99
GRANDSTREAM HT802 2 PORT FXS ANALOG VOIP PHONE TELEPHONE ADAPTER WORKING *READ
$21.17
Unlocked Cisco / Linksys SPA2102 VoIP 2FXS Phone Adapter with Router
$17.99
MagicJack - HOME VoIP Telephone Adapter - Black (read Description)
$19.99
Linksys Phone Adapter Vonage with 2 Port Voice Over IP VOIP PAP2 Factory Sealed
$22.25
SHORETEL IP 565 VOIP BUSINESS TELEPHONE PHONE W/ STAND HANDSET CORD
$27.40
Cisco CP-7961G VoIP PoE Business Desk Phone
$21.00