-
=========================
Knoppix 9.1 and mame 235
==========================
You can install mame 235 and run under knoppix9.1 by getting the debian i386 packages from testing (bookworm):
https://packages.debian.org/bookworm/i386/mame/download
Download Page for mame_0.235+dfsg.1-2_i386.deb
https://packages.debian.org/bookworm...-data/download
Download Page for mame-data_0.235+dfsg.1-2_all.deb
You still need these files also (see my previous post about mame 228 above for more information)
liblua5.3-0_5.3.3-1.1+b1_i386.deb
libpugixml1v5_1.11.4-1_i386.deb
You can also get mame-doc (0.235+dfsg.1-2) if you like.
Then just put them all in a directory and "sudo dpkg -i *.deb" and then you should be able to run mame 235 by running "mame".
Mame 235 is only a couple of months old, so it's pretty up to date.
=======================
(The Mame 237 debs in sid won't work on knoppix 9.1)
If you search at package.debian.org for mame there's various versions available, 235 being the most recent that will work on knoppix 9.1.
stretch (oldoldstable) (games): Multiple Arcade Machine Emulator (MAME)
0.182-1: amd64 arm64 armel armhf i386 mips mips64el mipsel ppc64el s390x
buster (oldstable) (games): Multiple Arcade Machine Emulator (MAME)
0.206+dfsg.1-1: amd64 arm64 armel armhf i386 mips mips64el mipsel s390x
bullseye (stable) (games): Multiple Arcade Machine Emulator (MAME)
0.228+dfsg.1-1: amd64 arm64 armhf i386 mips64el ppc64el s390x
bookworm (testing) (games): Multiple Arcade Machine Emulator (MAME)
0.235+dfsg.1-2: amd64 arm64 armel armhf i386 mips64el ppc64el s390x
sid (unstable) (games): Multiple Arcade Machine Emulator (MAME)
0.237+dfsg.1-1: amd64 arm64 armel armhf hppa i386 mips64el mipsel ppc64 ppc64el riscv64 s390x sh4 sparc64 x32
-
=========================
Knoppix 9.1 and other emulators
==========================
You can get other emulators running also, not just mame. I was able to get:
atari800
vice (name of executable program is x64, xpet, x128 )
dosbox
fs-uae
stella
running on knoppix9.1 by downloading the deb packages from package.debian.com (bullseye stable)
You could also use synaptic to download the packages, but I like the debs so I can install it offline (no internet necessary).
atari800_4.1.0-3_i386.deb
vice_3.5.0.dfsg-3_i386.deb (c64 emulator)
stella_6.5.2-1_i386.deb (atari 2600 emulator)
dosbox_0.74-3-3_i386.deb (dos games emulator)
libsdl-sound1.2_1.0.3-9+b1_i386.deb
fs-uae_3.0.5+dfsg-1_i386.deb (fs-uae is an amiga emulator)
fs-uae-launcher_3.0.5+dfsg-1_all.deb
python3-pyqt5.qtopengl_5.15.2+dfsg-3_i386.deb
There's other emulators too:
https://packages.debian.org/bullseye/games-emulator
(This metapackage lists a bunch of emulator packages)
Last edited by don999; 11-06-2021 at 02:19 AM.
-
=========================
Getting the joystick/gamepad working (using setfacl)
==========================
Okay, I have spent way more time than I ever wanted to fiddling with permissions and the like. However, I've found a pretty simple way to get the joystick working.
There's actually two different styles of joystick access: one is with /dev/input/eventX and the other is with /dev/input/jsX.
I think /dev/input/eventX is the more recent, and /dev/input/jsX is the "old" way.
So when I boot knoppix, my gamepad shows up as /dev/input/event4. So you'll need to figure out which file represents your gamepad.
When I do a "ls -l /dev/input/by-id" the gamepad has a symlink to /dev/input/event4.
So I do this:
Code:
sudo setfacl -m "u:knoppix:rw-" /dev/input/event4
sudo setfacl -m "u:knoppix:rw-" /dev/input/js0
touch /dev/input/js0
so once you "touch" the js0, it sets up a symlink to /dev/input/js0 in the /dev/input/by-id directory.
When you run touch, it may complain about not being able to set the time. (Doesn't seem to hurt anything)
The reason I use "touch" is to make an access to /dev/input/js0.
Running "hexdump -C /dev/input/js0" would do the same thing (CTRL+C to exit after generating some joystick activity).
The setfacl commands above will give the user knoppix read and write file access using an access control list. setfacl = set file access control list (-m is modify).
getfacl = get file access control list.
If you do a "ls -l /dev/input" you will see a + after rw-rw-r--+, the + indicates that there's an access control list for that file.
So as a test, launch chromium or firefox, go to "about:blank" and bring up the f12 console. Press a joystick button. Type "navigator:getGamepads()" and hit enter.
Remember that you have to generate joystick activity (like pressing buttons) to see the gamepad in chromium or firefox.
If your joystick is working on /dev/input/js0 you should see a list like
Code:
(firefox)
navigator.getGamepads()
Array [ Gamepad ]
(chromium)
navigator.getGamepads()
GamepadList {0: Gamepad, 1: null, 2: null, 3: null, length: 4}
If it isn't working, you will see
Code:
(firefox)
navigator.getGamepads()
Array []
(chromium)
navigator.getGamepads()
GamepadList {0: null, 1: null, 2: null, 3: null, length: 4}
Once you enter the commands below, press a joystick button. Type "navigator:getGamepads()" and hit enter. You don't have to relaunch firefox or chromium if it's already open, it should work.
Code:
echo launch chromium or firefox here and getGamepads here wont work
sudo setfacl -m "u:knoppix:rw-" /dev/input/event4
sudo setfacl -m "u:knoppix:rw-" /dev/input/js0
touch /dev/input/js0
echo now getGamepads here should work
Last edited by don999; 11-14-2021 at 01:19 AM.
-
Being able to compile mame in knoppix 9.1
============================
Being able to compile mame 238 in knoppix 9.1
============================
What's necessary to compile mame is just:
sudo apt-get install git build-essential python libsdl2-dev libsdl2-ttf-dev libfontconfig-dev libpulse-dev qt5-default
but what if we wanted to be able to compile mame by adding .deb packages manually?
I got the following packages from packages.debian.org:
libasound2-dev_1.2.4-1.1_i386.deb
libpulse-dev_14.2-2_i386.deb
libqt5core5a_5.15.2+dfsg-9_i386.deb
libqt5gui5_5.15.2+dfsg-9_i386.deb
libqt5widgets5_5.15.2+dfsg-9_i386.deb
libsdl2-dev_2.0.14+dfsg2-3_i386.deb
libsdl2-ttf-dev_2.0.15+dfsg1-1_i386.deb
libsdl-sound1.2_1.0.3-9+b1_i386.deb
libsndio-dev_1.5.0-3_i386.deb
libudev-dev_247.3-6_i386.deb
qtbase5-dev_5.15.2+dfsg-9_i386.deb
qtbase5-dev-tools_5.15.2+dfsg-9_i386.deb
also need these to run:
liblua5.3-0_5.3.3-1.1+b1_i386.deb
libpugixml1v5_1.11.4-1_i386.deb
So put them all in a directory then:
sudo dpkg -i --force-depends *.deb
and it will install them all at once. We use --force-depends because we haven't actually got every package needed to satisfy all the dependencies.
Get the source for mame0238 and extracting the mame0238.exe, cd into the directory, edit the makefile with
"nano makefile" so that we specify our compile to be 32 bit and where to find qt5:
#PTR64 = 1
edit to say
PTR64 = 0
since we're compiling for an 32 bit target
and also
#QT_HOME = /usr/lib/qt5/
edit to
QT_HOME = /usr/lib/i386-linux-gnu/qt5/
then save it with CTRL+O, exit with CTRL+X.
time make -j4
and it should be able to complete the compile.
and launch your freshly compiled mame with
./mame -rompath "path_to_my_roms"
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU
$149.95
Dell Poweredge R720xd 2x Xeon E5-2670 2.6GHz 16-Cores 64gb H710p 26x Trays
$339.99
DELL PowerEdge R630 8SFF Server 2x E5-2667v3 3.2GHz =16 Cores 64GB H730 4xRJ45
$266.00
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$562.00
Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU
$132.95