Hello Mikael!
Have a look at http://knopper.net/knoppix/knoppix760-en.html
→Update: Computers without DVD drive
Hi, I have a laptop running kubuntu without any windows installed. I have downloaded the KNOPPIX ISO image The laptop I am using has no DVD unit. I need to know how to make a bootable USB-stick. Preferable it should work on both 32-bit (Pentium-4) and 64-bit (AMD or Intel CPU). I have a couple of computers but no working windows version. They was dying years ago and reinstall them with GNU/Linux Live USB. Previous Live iso images I just did "dd if= of=/dev/sdb bs=4M" and was able to restart the computer booting the live usb stick. I have tried above method and unetbootin without any luck. How do I continue?
Hello Mikael!
Have a look at http://knopper.net/knoppix/knoppix760-en.html
→Update: Computers without DVD drive
Hi!
I think the question is how to create a bootable USB stick with Knoppix 7.6.0 on it without having to boot Knoppix itself.
I suggest you try the following.
If you already have got a bootable USB stick with syslinux 6.0.3 you could mount the Knoppix ISO and copy the KNOPPIX directory with subdirectories to the root directory of the USB stick. Then copy the boot directory with subdirectories to the USB stick, too. Rename the directory boot/isolinux to boot/syslinux and the configuration file boot/syslinux/isolinux.cfg to boot/syslinux/syslinux.cfg
Try to boot from your USB stick. If it does not boot try to configure syslinux so that it uses boot/syslinux/syslinux.cfg
http://www.wgdd.de/2013/08/create-kn...tick-from.html I have found a solution and it worked from lubuntu. $ isohybrid -o 1 -h 64 -s 32 -e 1 KNOPPIX_V7.6.0DVD-2015-11-21-EN.iso and $ cat KNOPPIX_V7.6.0DVD-2015-11-21-EN.iso > /dev/sdb I now running KNOPPIX 7.6.0 and now install it to the harddisk.
And? Do you also have → persistent memory and → UNIONFS?
In my last posting I forgot to mention, how to use Knoppix without DVD-drive.
Last edited by Werner P. Schulz; 12-10-2015 at 05:46 PM.
You can read more about isohybrid in the Syslinux Wiki.
@ mikael.palmkvist@yahoo.se: Thank you for telling us your solution. I did not know the program isohybrid before.
I did not know about kvm-qemu, I have to change bios setting to get it working, nice and thanks you all.
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module
$279.97
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$499.00
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$140.00
Cisco Nexus N9K-C93108TC-EX 48-Port 10G RJ-45 6x100G QSFP Network Switch W/Ears
$499.99
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 10 @ C
$39.99
Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850
$124.90
Cisco WS-C2960X-48FPD-L 48 POE+ GE+2 10G SFP+, LAN BASE (740W)
$84.99
NEW Cisco C9300-NM-2Y Dual-Port SFP 25G Network Module / NEW -
$544.99
Cisco Nexus 9300 N9K-C9372PX 48-Port SFP 10G 6-Port QSFP 40G Network AFI Switch
$150.00