Results 1 to 3 of 3

Thread: Make knoppix run with xmodule=nv

  1. #1
    Junior Member
    Join Date
    Dec 2015
    Posts
    1

    Make knoppix run with xmodule=nv

    Hello guys,

    I need a little help from u.
    I have a problem running Knoppix on my old computer.
    Knoppix freeze after displaying the background image.
    I think the problem is from driver/module of the video card (nVidia FX5200) because when i boot knoppix using xmodule=nv command knoppix runs perfect.
    Other thing that i noticed.. when knoppix freezes the video driver for my video card is nouveau not nvidia.
    What can i do (what files do i have to modify) to make knoppix boot with xmodule=nv without me interfering?
    (i am not an expert on linux so please be more detailed)

    Thx.

  2. #2
    Hi:

    Assuming the bootloader of SYSLINUX is used to boot up KNOPPIX, the xmodule=nv cheatcode can be appended to its configuration file, syslinux.cfg. On a typical set-up of KNOPPIX, the file can be found in the /mnt-system/boot/syslinux folder. The exact place to append the cheatcode is documented under the Micro-Remastering section of KNOPPIX's wiki (http://knoppix.net/wiki3/index.php?t...ro-Remastering). In the case of GRUB Legacy or GRUB2 used as bootloader, the details can also be found on KNOPPIX's wiki (http://knoppix.net/wiki3/index.php?t...e_Installation).

    For curing the failure to enter runlevel 5, I am gonna keep my mouth shut coz that's too techie for my level... If others have found the time to be on board, they may ask to have a quick peek at the Xorg.log file when booting with the nouveau driver....

  3. #3
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Time to ask the obvious questions that I've asked so many times before. Did you burn the ISO file at a low speed? Did you check the md5 of the image that you downloaded? Have you run testdisk? Have you run memcheck? What version of Knoppix are you talking about and, if as expected it is the current version, had you been able to run older versions without problems?

    If xmodule=nv resolves your problem, why do you not just do that? Lots of people use "cheat codes" to help Knoppix boot.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB picture

Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB

$2294.99



Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB picture

Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB

$3299.99



Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb picture

Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb

$599.99



DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC picture

DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC

$50.00



HPE ProLiant BL460C 6248 Blade Server NO HDD picture

HPE ProLiant BL460C 6248 Blade Server NO HDD

$300.00



DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD picture

DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD

$94.50



HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD  picture

HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD 

$78.00



Dell PowerEdge M1000e (BMX01) Server Enclosure w/ 16-PowerEdge M610 Blade Server picture

Dell PowerEdge M1000e (BMX01) Server Enclosure w/ 16-PowerEdge M610 Blade Server

$899.99



Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture

Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W

$349.00



Dell PowerEdge M620 Blade Server picture

Dell PowerEdge M620 Blade Server

$39.99