Read the "help" part of the tool Knoppix HD Install.
Ok, I have the knoppix live 7.2.0 CD and using Gparted I have partitioned my main HDD to have 24Gb set aside for knoppix, formatted to ext3, in this partition I have created a smaller 3Gb swap partition. The total 24Gb partition is now mounted. When I try to install knoppix it just comes back with the same option of using GParted, it will not find the already formatted partition and install to it. I am new to knoppix and linux but am very familiar with PCs. I have been following instructions to the letter but knoppix just won't find the partition. I've looked on line for answers but I think my question is too specific, is there anyone out there who has had to overcome the same glitch?
Read the "help" part of the tool Knoppix HD Install.
Don't read all. Read only the help of Knoppix own tool...all the "help" parts..
Seagate Exos X22 ST22000NM001E 22TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$311.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.71
881507-001 HPE 2.4TB SAS 12G 10K SC 512E DS G8-G10 Hard Drive 881457-B21 F/S
$274.95
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$169.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Seagate Exos X22 ST20000NM004E 20TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$268.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99