Thank you both. I will read your thread utu
Capricorny refers to this, I think:
http://knoppix.net/forum/threads/306...ht=persistence
I still use this method, only now I define a similar function in ~/.bashrc,
rather than /etc/profile.
Since Knoppix 7.6.1 initially comes with both KNOPPIX and KNOPPIX1 cloops,
my current unique cloop compacted addition is KNOPPIX2.
I generally don't require more than one additional cloop to capture all
my unique stuff. My KNOPPIX2 is about half the size of Klaus K's KNOPPIX1,
for example.
Operating this way protects me from over-writing that
persistence material which I have converted to cloop form. It does not
protect me from overwriting new persistence material in read-write
reiserfs form.
There still remains an ever-present danger of spoiling by filesystem
corruption, either or both KNOPPIX partitions by inadvertently
removing the LiveUSB without an orderly shut-down. I have no
solution for that and have never been able to resurrect and correct
a filesystem corrupted by improper shutdown.
Re-mastering is conceptually purer, certainly produces a smaller
final cloop collection of material, but requires about twice the
amount of space in which to perform the compaction, and much more
time in which to do what needs to be done. Re-mastering does not
solve the improper shutdown hazard either, unfortunately.
Thank you both. I will read your thread utu
What I finally did was only to copy KNOPPIX to my hard disk (knoppix tohd=/dev/sda2), it copies all my settings from the pen drive in the hard disk (even persistence). So, in my pen drive I keep all my settings and Knoppix saved but I am not using it anymore, I only need to boot with my pen drive and when I type the persistence password I can remove the pen drive and use KNOPPIX from my hard disk, without the pen drive plugged. When i boot with the pen drive knoppix automatically boots from the hard disk, founding Knoppix in there. If some day I get some problems in this configuration I only need to delete KNOPPIX folder in my hard disk and again from the pen drive: knoppix tohd=/dev/sda2, but from time to time I will update my pen drive booting as: knoppix fromhd=/dev/sdb1
That's a simple way of a Poor Man's Install. You could edit the booting config file to include the parameter alternatives for simpler typing. You could also use more than one Knoppix install on the HD, for example if you want to experiment with different alternatives and don't want to ruin the main working version while experimenting.
Yes, I changed some parameters to boot. About more than 1 knoppix on the hd, do you mean to change the name KNOPPIX to the folder and if something changes then delete the previous folder and use this one changing the name to KNOPPIX to boot?. As I said, knoppix boots automatically from the hd (searching first in it, not in the pendrive).
If you use syslinux boot, you can edit boot/syslinux/syslinux.cfg, and eventually add more alternatives to suit your needs
The stanza for booting the 64-bits kernel in 7.6.1 is
Here you may add another entry, for example if you have KNOPPIX in a directory KNOPPIX761_0 on /dev/sda1 - using knoppi65-0p at the boot prompt:Code:LABEL knoppix64 KERNEL linux64 APPEND lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
And the same without persistent imageCode:LABEL knoppix64-0p KERNEL linux64 APPEND lang=en apm=power-off initrd=minirt.gz fromhd=/dev/sda1 nosound knoppix_dir=KNOPPIX761_0 nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
I haven't used syslinux for a long time, so there may be some errors here, but you get the idea. I have a version number on the KNOPPIX directories, as there may be several remasterings of a release on the same partition. Furthermore, you may want to patch minirt.gz, for example going over to squashfs instead of cloop. Then you save it under another name, and use that for the initrd boot parameter. Same if you change the kernel.Code:LABEL knoppix64-0 KERNEL linux64 APPEND lang=en apm=power-off initrd=minirt.gz fromhd=/dev/sda1 noimage nosound knoppix_dir=KNOPPIX761_0 nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
Thank you! I have never used syslinux.cfg in that way and now I am wondering why... I will test it asap.
I should add that syslinux isn't limited to booting Knoppix, even if it comes up with Knoppix screen. I just copied kernel and initrd for Debian 8.3 into the syslinux directory, added entry for Debian 8.3, and placed the compressed and persistent images in right places. No problem multi-booting Debian 8.3 and Knoppix. For more routine multiboot use, I prefer legacy grub, though.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$22.45
Hynix 2x 8GB (16GB) PC4-19200 DDR4-2400MHz 288Pin Desktop Memory Module
$18.99
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
Micron 8GB DDR4 1Rx16 PC4-3200AA Laptop RAM Memory MTA4ATF1G64HZ-3G2E2
$10.00
Micron 16GB 2Rx8 PC4-2400T-SE1-11 Laptop Memory MTA16ATF2G64HZ-2G3E1 Tested
$17.99
SK Hynix 16GB 2Rx8 PC4-2400T-SE1-11 Laptop Memory HMA82GS6AFR8N-UH Tested
$17.99
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
A-Tech 128GB 4x 32GB 2Rx4 PC4-19200R DDR4 2400 ECC REG RDIMM Server Memory RAM
$191.96
Dell SNPTP9W1C/16G 16 GB 2666MHz (PC4-2666) Memory Ram
$34.95