Results 1 to 5 of 5

Thread: Trying to get a pre-built Knoppix environment to boot...

  1. #1
    Junior Member
    Join Date
    Mar 2016
    Posts
    1

    Trying to get a pre-built Knoppix environment to boot...

    Hi everyone,

    An academic has given me a copy of a KNOPPIX with a program built into it. See the imgur link below for the file structure I have been given.
    The files were given to me in a zipped folder, with the only instruction being to 'burn the files within this zip folder to a CD'.

    Is there a specific process I have to follow to get the files I've been given into a bootable state? Everything I have tried has not worked: simply burning the files using any CD burning software does not result in a bootable CD. The guides I have found for burning a bootable KNOPPIX CD also don't appear to be applicable to my situation since I'm not creating a brand new KNOPPIX environment - I'm trying to get a pre-existing and modified environment to boot.

    I've been assured that these files have resulted in a bootable and functional KNOPPIX system in the past.




    isolinux.cfg:

    Code:
    DEFAULT linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=791 initrd=miniroot.gz nomce quiet alsa noscsi BOOT_IMAGE=knoppix
    TIMEOUT 300
    
    PROMPT 1
    DISPLAY boot.msg
    F1 boot.msg
    F2 f2
    LABEL lamppix
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=791 initrd=miniroot.gz nomce quiet alsa noscsi BOOT_IMAGE=knoppix
    LABEL lamppix-scsi
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=791 initrd=miniroot.gz nomce quiet alsa BOOT_IMAGE=knoppix
    LABEL knoppix-txt
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=normal initrd=miniroot.gz nomce quiet alsa BOOT_IMAGE=knoppix
    LABEL expert
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=791 initrd=miniroot.gz nomce alsa BOOT_IMAGE=knoppix
    LABEL fb1280x1024
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=794 xmodule=fbdev initrd=miniroot.gz alsa nomce quiet noscsi BOOT_IMAGE=knoppix
    LABEL fb1024x768
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=791 xmodule=fbdev initrd=miniroot.gz alsa nomce quiet noscsi BOOT_IMAGE=knoppix
    LABEL fb800x600
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=788 xmodule=fbdev initrd=miniroot.gz alsa nomce quiet noscsi BOOT_IMAGE=knoppix
    LABEL failsafe
    KERNEL linux26
    APPEND ramdisk_size=100000 init=/etc/init lang=us vga=normal nosound noapic noscsi nodma noapm nousb nopcmcia nofirewire noagp nomce nodhcp xmodule=vesa initrd=miniroot.gz BOOT_IMAGE=knoppix
    LABEL userdef
    KERNEL linux26
    APPEND ###############################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################

    Thank you so much for reading! I really need all the help I can get

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Knoppix is normally released as a ISO file that MUST be burnt "AS AN IMAGE" to a CD to make it bootable. Simply copying any set of files (or even a bootable ISO) to a disc (DVD rather than CD most recently) will not allow you to boot the resulting disk, you just end up with a disc with files on it but no boot structure. If a disc could be created that way, then I expect Klaus and others would do it, as convincing newcomers to burn the ISO file "AS AN IMAGE" is one of the more challenging things for a novice to overcome. If you want to be able to boot a disc you simply can't just copy files to it. So whoever gave you that information was wrong. Beyond that I don't know what he was trying to do or what he gave you, I suggest that you get back in touch with him.

    However, you say that you got a zipped folder, but I have to question if you are sure that you were given a zipped folder of are you letting Windows hide file extensions from you and have you by chance really been given an ISO file? Many people have come here thinking they have a zip file but really have an ISO file and Windows is hiding the extension from them (and they foolishly don't turn that "feature" off). If you have an ISO file then follow the instructions for burning it "AS AN IMAGE" and you'll likely produce a bootable image.

    I recommend Nero for this purpose, even the brief trial version. Windows 7 (and I suspect later versions) can burn an ISO into a bootable image but Windows doesn't let you do a low speed burn, and high speed burns have their own set of booting problems.
    Last edited by Harry Kuhman; 03-11-2016 at 06:12 AM.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  3. #3
    Senior Member
    Join Date
    Jan 2012
    Posts
    108

    NOT "BURNING". Why not and How eventually

    [QUOTE=Harry Kuhman;133498]Knoppix is normally released as a ISO file that MUST be burnt "AS AN IMAGE"

    Mr Kuhman

    Now that "usb devices" are very common, do you know why

    it is not possible

    to get from official sites a single file especially dedicated for direct

    INSTAALATION on them and so avoiding "BURNING" matters.

    My question is probably too na´ve...but it may be a suggestion.

    Thanks you eventually for your response.

    knp

  4. #4
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    I have no knowledge of why Klaus chooses to do what he does or does not do.

    My use of Knoppix has always been limited to the Live CD or DVDs that it was designed for. I have tried to get flash drives working in the past, but never with any luck. Others have gotten this to work so I will accept that the fault is with me but I do not believe it is obviously simple. Nor have I had much luck with installed Knoppix and "persistence". For normal Linux installs I suggest distros that are intended to be installed to disc, with my personal choice being Debian.

    There are tools that have been developed that will install an ISO to a flash drive and make it bootable. But they are not really want you want either. That would only give you a "Live DVD" read only version of Knoppix stored on a flash drive, and you seem to want a fully functional and flexible read/write system on your flash drive. All that I have to offer here is that isn't Knoppix. Can it be make to work? I believe the answer is yea, kinda, sorta, with more effort than it is worth and with more issues cropping up in the future. Again, I suggest installing a distro like Debian to your flash drive.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  5. #5
    Senior Member
    Join Date
    Jan 2012
    Posts
    108
    Thanks you Mr H. Kuhman.

    knp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper EX4200-48PX 48-Port PoE+ Switch 10/100/1000BaseT picture

Juniper EX4200-48PX 48-Port PoE+ Switch 10/100/1000BaseT

$180.00



JUNIPER NETWORKS Qfx5100-48s-afi 48Port 10 Gigabit Ethernet Switch *WORKING*NC picture

JUNIPER NETWORKS Qfx5100-48s-afi 48Port 10 Gigabit Ethernet Switch *WORKING*NC

$1599.99



JUNIPER EX3300-24T - 24-Port 1Gb + 4-Port SFP 10Gb Ethernet Switch - Tested picture

JUNIPER EX3300-24T - 24-Port 1Gb + 4-Port SFP 10Gb Ethernet Switch - Tested

$145.00



JUNIPER NETWORKS EX2200-48P-4G PoE 48 port network Gigabit switch picture

JUNIPER NETWORKS EX2200-48P-4G PoE 48 port network Gigabit switch

$68.00



Juniper EX3300-24P 24 Port Switch picture

Juniper EX3300-24P 24 Port Switch

$160.00



JUNIPER QFX5100-48S-AFI SWITCH 48 SFP+ 6QSFP  2xPSUs TESTED AND WORKING picture

JUNIPER QFX5100-48S-AFI SWITCH 48 SFP+ 6QSFP 2xPSUs TESTED AND WORKING

$1599.99



Juniper Networks QFX5100-24Q-3AFO 24x QSFP+ Ports Switch-Lifetime Warranty picture

Juniper Networks QFX5100-24Q-3AFO 24x QSFP+ Ports Switch-Lifetime Warranty

$824.00



Juniper EX4200-48Px Ethernet Switch 48x 1GbE POE+ ports 750-034195 2x 930W PSU picture

Juniper EX4200-48Px Ethernet Switch 48x 1GbE POE+ ports 750-034195 2x 930W PSU

$119.00



Juniper Networks EX4300-48P 48Port GbE PoE+ Switch 1000Base-T EX 4300 48P picture

Juniper Networks EX4300-48P 48Port GbE PoE+ Switch 1000Base-T EX 4300 48P

$243.00



Juniper Networks EX3300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch picture

Juniper Networks EX3300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch

$299.00