-
Senior Member
registered user
Poor Man's Install to Hard Disk since Knoppix 7.6.0
I always run Knoppix as a 'Poor man's Install' on my hard drive. I use Grub4DOS to boot my multi OS system and the stanza that boots my Knoppix is something like:
title Knoppix 7.7 DVD
# MUST add the mkimage cheat code to create a persistent image file. The cheatcode can be removed once the file is created.
# Use preferences-desktop inside Knoppix to reset background wallpaper from none to supplied background.jpg.
kernel (hd0,4)/FrugalLinux/knoppix-770/linux knoppix nomce fromhd=/dev/sdb5 knoppix_dir=/FrugalLinux/knoppix-770 knoppix_name=KNOPPIX lang=uk libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime apm=power-off
initrd (hd0,4)/FrugalLinux/knoppix-770/minirt.gz
boot
Now, this has worked for many years but since the release of 7.6.0 I have had a problem.
Things proceed OK and then the following message flashes continuously:
Waiting (USB) Knoppix 7.7 in: /dev/sb5
After a while I get the message:
Could not mount disk to /mnt-system. Starting debugging Shell
and you are dumped at the command prompt.
I initially thought that this was a bug in 7.6 but it also happens with 7.7.
Based on the initial message displayed I wondered if a Poor Man's Installed Knoppix would now only boot from USB connected devices. I decided to replace the minirt.gz file from 7.7 with that from 7.5 and it boots! This is a good temporary solution but since the minrt.gz of 7.7 may have other useful improvements I would prefer to solve the problem properly.
I am a little surprised no one else has reported this problem - Capricorny, for example, boots this way I think?
Has anyone else had this problem?
Does anybody have a proper solution, which may involve the modification of the files within minirt.gz I guess?
-
640/5000
Here is the procedure I followed
Formatting a partition in fat,
Copy on this dvd partitition via flash install
Starting with the DVD by doing fromhd = / dev / (fat partition)
Copy of the boot directory in mnt-system,
Chmod + x / boot / *
Back to my boot partition: debian strech
Editing my /etc/grub.d/40_custom file
Menuentry 'knoppix' {
Insmod part_msdos
Insmod fat
Insmod chain
Set root = 'hd1, msdos1'
Search -no-floppy -fs-uuid -set = root (uuid number of my partition)
Linux / boot / vmlinuz root = / dev / sdb1
Initrd /boot/ninirt.gz
Boot desktop = gnome
}
It works very well and the startup is very very fast
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch picture](/store/img/g/d3AAAOSw35dlrsCo/s-l225/Cisco-Nexus-N9K-C92160YC-X-48P-25GbE-SFP28-6P-QSFP.jpg)
Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch
$499.00
![Cisco Nexus 48-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP picture](/store/img/g/IwQAAOSw5A9mS3oa/s-l225/Cisco-Nexus-48-Port-10G-SFP-Switch-N9K-93128TX-w-9.jpg)
Cisco Nexus 48-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP
$112.49
![Brand New SEALED Cisco 3850 Series Network Module C3850-NM-4-1G 4 x 1GE Network picture](/store/img/g/qr8AAOSwf0Nl7Gl5/s-l225/Brand-New-SEALED-Cisco-3850-Series-Network-Module-.jpg)
Brand New SEALED Cisco 3850 Series Network Module C3850-NM-4-1G 4 x 1GE Network
$180.00
![Cisco Nexus N3K-C3172PQ-10GE 48P 10GbE 6P QSFP+ Switch N3K-C3172PQ-10GE picture](/store/img/g/FnMAAOSwAO9lrsAL/s-l225/Cisco-Nexus-N3K-C3172PQ-10GE-48P-10GbE-6P-QSFP-Swi.jpg)
Cisco Nexus N3K-C3172PQ-10GE 48P 10GbE 6P QSFP+ Switch N3K-C3172PQ-10GE
$189.00
![Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch (Fair) picture](/store/img/g/K9MAAOSw-4JmfV3v/s-l225/Cisco-Nexus-N3K-C3064PQ-10GX-48P-10GbE-SFP-4P-QSFP.jpg)
Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch (Fair)
$85.00
![Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture](/store/img/g/yEAAAOSwxVReIhma/s-l225/Cisco-C3850-NM-2-10G-2-Port-Network-Exp-Module-for.jpg)
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
![New Sealed Cisco GLC-SX-MMD 1000BASE-SX Transceiver Module *US Shipping* picture](/store/img/g/m7EAAOSwMSNlzEVH/s-l225/New-Sealed-Cisco-GLC-SX-MMD-1000BASE-SX-Transceive.jpg)
New Sealed Cisco GLC-SX-MMD 1000BASE-SX Transceiver Module *US Shipping*
$11.00
![Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850 picture](/store/img/g/qPUAAOSwuOJd2AEx/s-l225/Cisco-C3850-NM-4-10G-4-Port-Network-Exp-Module-for.jpg)
Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850
$139.99
![Cisco IE-1000-8P2S-LM Industrial Ethernet Switch New Sealed picture](/store/img/g/s8IAAOSwtZBlgT3v/s-l225/Cisco-IE-1000-8P2S-LM-Industrial-Ethernet-Switch-N.jpg)
Cisco IE-1000-8P2S-LM Industrial Ethernet Switch New Sealed
$995.57
![Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack picture](/store/img/g/cqoAAOSwtYVmS7LQ/s-l225/Cisco-WS-C2960X-48FPD-L-48-V07-POE-GE-2-10G-SFP-LA.jpg)
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$110.00