-
Senior Member
registered user
Poor Man's Install to Hard Disk since Knoppix 7.6.0
I always run Knoppix as a 'Poor man's Install' on my hard drive. I use Grub4DOS to boot my multi OS system and the stanza that boots my Knoppix is something like:
title Knoppix 7.7 DVD
# MUST add the mkimage cheat code to create a persistent image file. The cheatcode can be removed once the file is created.
# Use preferences-desktop inside Knoppix to reset background wallpaper from none to supplied background.jpg.
kernel (hd0,4)/FrugalLinux/knoppix-770/linux knoppix nomce fromhd=/dev/sdb5 knoppix_dir=/FrugalLinux/knoppix-770 knoppix_name=KNOPPIX lang=uk libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime apm=power-off
initrd (hd0,4)/FrugalLinux/knoppix-770/minirt.gz
boot
Now, this has worked for many years but since the release of 7.6.0 I have had a problem.
Things proceed OK and then the following message flashes continuously:
Waiting (USB) Knoppix 7.7 in: /dev/sb5
After a while I get the message:
Could not mount disk to /mnt-system. Starting debugging Shell
and you are dumped at the command prompt.
I initially thought that this was a bug in 7.6 but it also happens with 7.7.
Based on the initial message displayed I wondered if a Poor Man's Installed Knoppix would now only boot from USB connected devices. I decided to replace the minirt.gz file from 7.7 with that from 7.5 and it boots! This is a good temporary solution but since the minrt.gz of 7.7 may have other useful improvements I would prefer to solve the problem properly.
I am a little surprised no one else has reported this problem - Capricorny, for example, boots this way I think?
Has anyone else had this problem?
Does anybody have a proper solution, which may involve the modification of the files within minirt.gz I guess?
-
640/5000
Here is the procedure I followed
Formatting a partition in fat,
Copy on this dvd partitition via flash install
Starting with the DVD by doing fromhd = / dev / (fat partition)
Copy of the boot directory in mnt-system,
Chmod + x / boot / *
Back to my boot partition: debian strech
Editing my /etc/grub.d/40_custom file
Menuentry 'knoppix' {
Insmod part_msdos
Insmod fat
Insmod chain
Set root = 'hd1, msdos1'
Search -no-floppy -fs-uuid -set = root (uuid number of my partition)
Linux / boot / vmlinuz root = / dev / sdb1
Initrd /boot/ninirt.gz
Boot desktop = gnome
}
It works very well and the startup is very very fast
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell PowerEdge M710HD Blade Server
$130.00

HP Proliant BL460c G8 Blade Server Two XEON E5-2670 2X 8 Core 2.6GHz 128GB RAM
$120.00

Dell PowerEdge M620 Blade Server 2x E5-2690v2 3Ghz 20-Cores 256gb 2x 146gb 15k
$249.99

HP ProLiant BL660c Gen8 server 4x E5-4610 2.4GHz, 512gb RAM, 2X 146GB 15K SAS
$599.99

HP BL460C Gen9 Blade Server 2x E5-2620 V3/No Memory
$52.99

Dell PowerEdge M610 Blade Server Dual Xeon X5650 2.66GHz 192GB DDR3 RAM No HDD
$99.00

HP Proliant BL460c G7 Blade Server 2x Intel X5650 @ 2.66GHz 48GB RAM No HDD
$30.00

Cisco UCS B200 M4 UCS B-Series Blade Server Motherboard 2x Heatsinks No CPU/HDD
$37.49

Dell PowerEdge M620 Blade Server 2x E5-2660 2.2GHz 16C 256gb 2x 146gb 15k H310
$249.97

IBM HS23 Server 2x Xeon E5-2630 @ 2.30 GHz NO HDD NO RAM NO OS (LS)
$58.45