-
Senior Member
registered user
Poor Man's Install to Hard Disk since Knoppix 7.6.0
I always run Knoppix as a 'Poor man's Install' on my hard drive. I use Grub4DOS to boot my multi OS system and the stanza that boots my Knoppix is something like:
title Knoppix 7.7 DVD
# MUST add the mkimage cheat code to create a persistent image file. The cheatcode can be removed once the file is created.
# Use preferences-desktop inside Knoppix to reset background wallpaper from none to supplied background.jpg.
kernel (hd0,4)/FrugalLinux/knoppix-770/linux knoppix nomce fromhd=/dev/sdb5 knoppix_dir=/FrugalLinux/knoppix-770 knoppix_name=KNOPPIX lang=uk libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime apm=power-off
initrd (hd0,4)/FrugalLinux/knoppix-770/minirt.gz
boot
Now, this has worked for many years but since the release of 7.6.0 I have had a problem.
Things proceed OK and then the following message flashes continuously:
Waiting (USB) Knoppix 7.7 in: /dev/sb5
After a while I get the message:
Could not mount disk to /mnt-system. Starting debugging Shell
and you are dumped at the command prompt.
I initially thought that this was a bug in 7.6 but it also happens with 7.7.
Based on the initial message displayed I wondered if a Poor Man's Installed Knoppix would now only boot from USB connected devices. I decided to replace the minirt.gz file from 7.7 with that from 7.5 and it boots! This is a good temporary solution but since the minrt.gz of 7.7 may have other useful improvements I would prefer to solve the problem properly.
I am a little surprised no one else has reported this problem - Capricorny, for example, boots this way I think?
Has anyone else had this problem?
Does anybody have a proper solution, which may involve the modification of the files within minirt.gz I guess?
-
640/5000
Here is the procedure I followed
Formatting a partition in fat,
Copy on this dvd partitition via flash install
Starting with the DVD by doing fromhd = / dev / (fat partition)
Copy of the boot directory in mnt-system,
Chmod + x / boot / *
Back to my boot partition: debian strech
Editing my /etc/grub.d/40_custom file
Menuentry 'knoppix' {
Insmod part_msdos
Insmod fat
Insmod chain
Set root = 'hd1, msdos1'
Search -no-floppy -fs-uuid -set = root (uuid number of my partition)
Linux / boot / vmlinuz root = / dev / sdb1
Initrd /boot/ninirt.gz
Boot desktop = gnome
}
It works very well and the startup is very very fast
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module picture](/store/img/g/E0cAAOSwNzxmPkm2/s-l225/Cisco-Catalyst-C9300-24UX-A-24-Port-10G-mGig-UPOE-.jpg)
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module
$279.97
![Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch picture](/store/img/g/UdkAAOSwDmpmMtqf/s-l225/Cisco-Catalyst-C9300-24UX-A-24-Port-10G-mGig-Coppe.jpg)
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$499.00
![Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack picture](/store/img/g/cqoAAOSwtYVmS7LQ/s-l225/Cisco-WS-C2960X-48FPD-L-48-V07-POE-GE-2-10G-SFP-LA.jpg)
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$140.00
![Cisco Nexus N9K-C93108TC-EX 48-Port 10G RJ-45 6x100G QSFP Network Switch W/Ears picture](/store/img/g/5bAAAOSwPTRlZ7fl/s-l225/Cisco-Nexus-N9K-C93108TC-EX-48-Port-10G-RJ-45-6x10.jpg)
Cisco Nexus N9K-C93108TC-EX 48-Port 10G RJ-45 6x100G QSFP Network Switch W/Ears
$499.99
![Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture](/store/img/g/yEAAAOSwxVReIhma/s-l225/Cisco-C3850-NM-2-10G-2-Port-Network-Exp-Module-for.jpg)
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
![Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 10 @ C picture](/store/img/g/oc8AAOSwCYRhKVrI/s-l225/Cisco-SFP-10G-SR-10-2415-03-10-Gigabit-Transceiver.jpg)
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 10 @ C
$39.99
![Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850 picture](/store/img/g/qPUAAOSwuOJd2AEx/s-l225/Cisco-C3850-NM-4-10G-4-Port-Network-Exp-Module-for.jpg)
Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850
$124.90
![CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC 10G 10GB SFP - 1 Year Warranty picture](/store/img/g/FkQAAOSwtBZbqRX9/s-l225/CISCO-SFP-10G-LR-SFP-TRANSCEIVER-MODULE-GBIC-10G-1.jpg)
CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC 10G 10GB SFP - 1 Year Warranty
$39.99
![Cisco Nexus 9300 N9K-C9372PX 48-Port SFP 10G 6-Port QSFP 40G Network AFI Switch picture](/store/img/g/RrEAAOSwNIVmY5WT/s-l225/Cisco-Nexus-9300-N9K-C9372PX-48-Port-SFP-10G-6-Por.jpg)
Cisco Nexus 9300 N9K-C9372PX 48-Port SFP 10G 6-Port QSFP 40G Network AFI Switch
$150.00
![NEW Cisco C9300-NM-2Y Dual-Port SFP 25G Network Module / NEW - picture](/store/img/g/OyYAAOSwDwNmWL~A/s-l225/NEW-Cisco-C9300-NM-2Y-Dual-Port-SFP-25G-Network-Mo.jpg)
NEW Cisco C9300-NM-2Y Dual-Port SFP 25G Network Module / NEW -
$544.99