-
Senior Member
registered user
Poor Man's Install to Hard Disk since Knoppix 7.6.0
I always run Knoppix as a 'Poor man's Install' on my hard drive. I use Grub4DOS to boot my multi OS system and the stanza that boots my Knoppix is something like:
title Knoppix 7.7 DVD
# MUST add the mkimage cheat code to create a persistent image file. The cheatcode can be removed once the file is created.
# Use preferences-desktop inside Knoppix to reset background wallpaper from none to supplied background.jpg.
kernel (hd0,4)/FrugalLinux/knoppix-770/linux knoppix nomce fromhd=/dev/sdb5 knoppix_dir=/FrugalLinux/knoppix-770 knoppix_name=KNOPPIX lang=uk libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime apm=power-off
initrd (hd0,4)/FrugalLinux/knoppix-770/minirt.gz
boot
Now, this has worked for many years but since the release of 7.6.0 I have had a problem.
Things proceed OK and then the following message flashes continuously:
Waiting (USB) Knoppix 7.7 in: /dev/sb5
After a while I get the message:
Could not mount disk to /mnt-system. Starting debugging Shell
and you are dumped at the command prompt.
I initially thought that this was a bug in 7.6 but it also happens with 7.7.
Based on the initial message displayed I wondered if a Poor Man's Installed Knoppix would now only boot from USB connected devices. I decided to replace the minirt.gz file from 7.7 with that from 7.5 and it boots! This is a good temporary solution but since the minrt.gz of 7.7 may have other useful improvements I would prefer to solve the problem properly.
I am a little surprised no one else has reported this problem - Capricorny, for example, boots this way I think?
Has anyone else had this problem?
Does anybody have a proper solution, which may involve the modification of the files within minirt.gz I guess?
-
640/5000
Here is the procedure I followed
Formatting a partition in fat,
Copy on this dvd partitition via flash install
Starting with the DVD by doing fromhd = / dev / (fat partition)
Copy of the boot directory in mnt-system,
Chmod + x / boot / *
Back to my boot partition: debian strech
Editing my /etc/grub.d/40_custom file
Menuentry 'knoppix' {
Insmod part_msdos
Insmod fat
Insmod chain
Set root = 'hd1, msdos1'
Search -no-floppy -fs-uuid -set = root (uuid number of my partition)
Linux / boot / vmlinuz root = / dev / sdb1
Initrd /boot/ninirt.gz
Boot desktop = gnome
}
It works very well and the startup is very very fast
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch picture](/store/img/g/UdkAAOSwDmpmMtqf/s-l225/Cisco-Catalyst-C9300-24UX-A-24-Port-10G-mGig-Coppe.jpg)
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$475.00
![Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack picture](/store/img/g/cqoAAOSwtYVmS7LQ/s-l225/Cisco-WS-C2960X-48FPD-L-48-V07-POE-GE-2-10G-SFP-LA.jpg)
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$140.00
![Lot of 10 Cisco Meraki MS220-8P-HW 8 Port Desktop Ethernet Switch - UNCLAIMED picture](/store/img/g/bpsAAOSwGhlkIdTy/s-l225/Lot-of-10-Cisco-Meraki-MS220-8P-HW-8-Port-Desktop-.jpg)
Lot of 10 Cisco Meraki MS220-8P-HW 8 Port Desktop Ethernet Switch - UNCLAIMED
$416.95
![Cisco 3560CG Series 8 Port POE Network Switch WS-C3560CG-8PC-S picture](/store/img/g/fjkAAOSweShmcw9Z/s-l225/Cisco-3560CG-Series-8-Port-POE-Network-Switch-WS-C.jpg)
Cisco 3560CG Series 8 Port POE Network Switch WS-C3560CG-8PC-S
$80.00
![🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥 picture](/store/img/g/KTkAAOSwcmBisISE/s-l225/-CISCO-SFP-10G-SR-V03-10-2415-03-850nm-10GBASE-SR-.jpg)
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
![GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03 picture](/store/img/g/tAkAAOSwdENkHItI/s-l225/GENUINE-Cisco-SFP-10G-SR-V03-SFP-GBIC-Transceiver-.jpg)
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
![Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture](/store/img/g/yEAAAOSwxVReIhma/s-l225/Cisco-C3850-NM-2-10G-2-Port-Network-Exp-Module-for.jpg)
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
![Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850 picture](/store/img/g/qPUAAOSwuOJd2AEx/s-l225/Cisco-C3850-NM-4-10G-4-Port-Network-Exp-Module-for.jpg)
Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850
$124.90
![Cisco WS-C3560CX-12PC-S 12 Port GbE PoE IP Base Catalyst Managed Switch, TESTED picture](/store/img/g/3uYAAOSwB5xlNrlG/s-l225/Cisco-WS-C3560CX-12PC-S-12-Port-GbE-PoE-IP-Base-Ca.jpg)
Cisco WS-C3560CX-12PC-S 12 Port GbE PoE IP Base Catalyst Managed Switch, TESTED
$174.00
![Cisco WS-C3850-12X48U-S 48x (12x MultiGB) UPoE RJ-45 1x Mod Slot Switch, Tested picture](/store/img/g/vEYAAOSwdN5mTjLr/s-l225/Cisco-WS-C3850-12X48U-S-48x-12x-MultiGB-UPoE-RJ-45.jpg)
Cisco WS-C3850-12X48U-S 48x (12x MultiGB) UPoE RJ-45 1x Mod Slot Switch, Tested
$259.00