-
Junior Member
registered user
Booting knoppix via RS232 terminal
Hello,
My CPU (Intel's ATOM) does not have a VGA, only RS232.
Is it possible to boot knoppix from RS232 ?
Thank you,
Z.V
-
Senior Member
registered user
I think you have to provide more information - but if it basically means that you have only text mode available, that should in principle work fine - just use the appropriate init level. But even basic RS232 support may be scarce nowadays, not to mention using it for display??? I suggest you ask on the Debian-knoppix mailing list.
-
Senior Member
registered user
Hello,
I think you have to configure the bootloader to communicate via serial port. I would also suggest you add a line to /etc/inittab which enables you to login via serial port.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox
$340.00
DELL PowerEdge R730 16SFF Server 2x E5-2690v4 =28 Cores No RAM/ HDD H730 4xRJ45
$232.97
Dell R630 8 Port SFF Server 2x E5-2680v4 28C H730P 128GB 2x Trays RJ-45 ENT
$345.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$600.00