-
Junior Member
registered user
Booting knoppix via RS232 terminal
Hello,
My CPU (Intel's ATOM) does not have a VGA, only RS232.
Is it possible to boot knoppix from RS232 ?
Thank you,
Z.V
-
Senior Member
registered user
I think you have to provide more information - but if it basically means that you have only text mode available, that should in principle work fine - just use the appropriate init level. But even basic RS232 support may be scarce nowadays, not to mention using it for display??? I suggest you ask on the Debian-knoppix mailing list.
-
Senior Member
registered user
Hello,
I think you have to configure the bootloader to communicate via serial port. I would also suggest you add a line to /etc/inittab which enables you to login via serial port.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$78.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$112.00
Lot of 3 - NetApp 2TB 7.2k SATA 3GBPS 3.5in Hard Drive X306A-R5
$69.99
WF12F DELL 1TB 7.2K 6GBPS SATA 2.5'' HDD HARD DRIVE ST91000640NS 0WF12F
$25.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HP 4TB 3.5" 12Gb/s 7.2K SAS Hard Drive P/N: 793674-001 / 803634-001 / 695597-004
$14.87
Western Digital WD5000LPLX 500GB 2.5" SATA 32MB 6Gb/s 7200RPM Laptop Hard Drive
$7.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
Seagate ST12000NM0538 Exos X14 12TB 3.5" SATA 6Gbps 3.5" Enterprise Hard Drive
$45.95