-
Junior Member
registered user
Booting knoppix via RS232 terminal
Hello,
My CPU (Intel's ATOM) does not have a VGA, only RS232.
Is it possible to boot knoppix from RS232 ?
Thank you,
Z.V
-
Senior Member
registered user
I think you have to provide more information - but if it basically means that you have only text mode available, that should in principle work fine - just use the appropriate init level. But even basic RS232 support may be scarce nowadays, not to mention using it for display??? I suggest you ask on the Debian-knoppix mailing list.
-
Senior Member
registered user
Hello,
I think you have to configure the bootloader to communicate via serial port. I would also suggest you add a line to /etc/inittab which enables you to login via serial port.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Dual Bay 2.5" SFF Blade Server Barebone No Processors No RAM
$250.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HP Proliant BL460c G10 Gen10 Blade Server No CPU/No Mem/No Drives/P204i-B
$329.99
Dell PowerEdge 1955 Blade Server 2x Intel Xeon 2.33GHz 4GB / 72gb hdd x 2 omy759
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
Dell PowerEdge M620 Blade Server
$39.99