-
Junior Member
registered user
Booting knoppix via RS232 terminal
Hello,
My CPU (Intel's ATOM) does not have a VGA, only RS232.
Is it possible to boot knoppix from RS232 ?
Thank you,
Z.V
-
Senior Member
registered user
I think you have to provide more information - but if it basically means that you have only text mode available, that should in principle work fine - just use the appropriate init level. But even basic RS232 support may be scarce nowadays, not to mention using it for display??? I suggest you ask on the Debian-knoppix mailing list.
-
Senior Member
registered user
Hello,
I think you have to configure the bootloader to communicate via serial port. I would also suggest you add a line to /etc/inittab which enables you to login via serial port.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$721.06
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2512.18
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 4x1G RJ-45 NIC 2x750W PSU
$399.04
CSE-118 Supermicro 1U 3x GPU Server 2.1Ghz 16-C 128GB CX353A 2x1600W PSU Rails
$450.03
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$275.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R630 2x Xeon E5-2630 V4 2.20GHZ 128GB DDR4-2133MHZ 2x 750W PSU
$170.95
Dell PowerEdge R430 3.5 1U 2x E5-2690 v3 2.6ghz 24-Cores 256gb 4x Trays 2x 550w
$289.99
Dell PowerEdge R620 Rack Server
$71.99