.
Background:
Here's an abbreviated tally of the cloops saved at /mnt-system/KNOPPIX/
on my current Knoppix 7.7 CeBIT version LiveUSB:
/mnt-system/KNOPPIX/ is a folder or directory on a FAT32 filesystemCode:knoppix@Microknoppix:~$ ls -l -o -h /mnt-system/KNOPPIX | grep KN -rwxrwxrwx 1 root 4.0G Apr 14 06:30 KNOPPIX The basic Knoppix 7 DVD -rwxrwxrwx 1 root 171M Apr 14 06:30 KNOPPIX1 Recent 3d & backup programs -rwxrwxrwx 1 root 7.5M Apr 14 06:30 KNOPPIX2 Flashplugin-nonfree -rwxrwxrwx 1 root 76M Apr 14 06:31 KNOPPIX3 My own tweaks & additions
which has a filesize limitation of just a little over 4 Gb. KNOPPIX, aka
KNOPPIX0, uses virtually all of the 4 Gb capability of a cloop device
on FAT32 to define most all of Knoppix 7 DVD's basic contents.
KNOPPIX1 contents plus KNOPPIX0's plus some auxiliary files would produce
a collection which would be slightly over the 4 Gb FAT32 filesize limit,
hence KNOPPIX1 contents are given their own cloop.
Since there are, at present, eight unique cloop device assignments, there
may be additional KNOPPIX[n]s defined, each having a 4 Gb capacity.
I postulate that KNOPPIX2 is Klaus K's way of providing the CeBIT Knoppix
version with proprietary flash material on the 7.7 DVD using LinuxPro
Magazine's authority to distribute.
KNOPPIX3 is my own current use of Knoppix cloops to make a read-only,
compact representation of my own tweaks & additions initially to a
read-write, not-compact, reiserfs persistence file, KNOPPIX-DATA.
I use a small bash program to do this.
See the following, where MakeOverlay is what I now call save.overlay:
http://knoppix.net/forum/threads/306...x-7-2-LiveUSBs
Premise:
With the advent of overlayfs, and especially using a 4.0-or-later kernel
there are opportunities to further aggregate & compact Knoppix cloop material.
It seems plausible that another small bash program might be similarly
useful to further agregate the initial contents K'1, K'2 and K'3 into
a new but larger but still-much-less-than-4 Gb re-defined K'1. The following
two references lead me to believe this:
See the answer to the cited question in...
http://askubuntu.com/questions/69956...verlayfs-usage
And, for additional expository material, see...
https://docs.docker.com/engine/userg...rlayfs-driver/
Immediate project:
I have in mind eventually defining a small bash program which I might call
merge.overlays, using the cited material and some additional ideas in:
https://github.com/davstott/ubuntu-u...aster/mergeusb
Last edited by utu; 04-15-2016 at 08:41 PM.
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.12
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch
$999.00
JUNIPER EX3300-48T 48 PORT SWITCH TESTED & RESET w/ Rack Ears
$49.99
New Factory Sealed Juniper EX2300-48P Networks 48-Port Managed Ethernet Sealed
$499.00
Juniper Networks EX3300-48T 48-Port PoE+ Gigabit Ethernet Switch 4x SFP+ TESTED
$99.99