Results 1 to 7 of 7

Thread: Touch pad scroll not working on knoppix 7.05

  1. #1
    Senior Member
    Join Date
    Nov 2011
    Posts
    127

    Touch pad scroll not working on knoppix 7.05

    Acer Aspire laptop 7741Z-4643 I've just created a new USB boot disk with knoppix 7.05 and the touchpad vertical scroll is either not working or it is very unreliable. On my 7.03 USB boot drive that I still have, the touchpad scroll still works fine when I boot with this drive My suspicion is that, I think there is a table that defines the touch pad location for scroll that is out of whack on 7.05 Stranglely, rarely on 7.05, the scroll, once in a great while the scroll, will work once and rotate the desktop, but can't seem to do it again. Anyone else have the same issue with the laptop touchpad scroll? Ideas? Oddly, in all previous versions of knoppix that I've tried, the touchpad vertical scroll has always worked, before 7.05 and it has not worked with with ubuntu. = = = = Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?
    Last edited by Denver Dave; 01-16-2013 at 06:30 AM.

  2. #2
    Senior Member
    Join Date
    Nov 2011
    Posts
    127
    Sorry about the run together paragraphs in the previous post, just figured out I needed to turn the noscript off for this page after I lost the ability to edit the post.

    = = = = =

    Acer Aspire laptop 7741Z-4643 I've just created a new USB boot disk with knoppix 7.05 and the touchpad vertical scroll is either not working or it is very unreliable. On my 7.03 USB boot drive that I still have, the touchpad scroll still works fine when I boot with this drive

    My suspicion is that, I think there is a table that defines the touch pad location for scroll that is out of whack on 7.05 Stranglely, rarely on 7.05, the scroll, once in a great while the scroll, will work once and rotate the desktop, but can't seem to do it again. Anyone else have the same issue with the laptop touchpad scroll? Ideas?

    Oddly, in all previous versions of knoppix that I've tried, the touchpad vertical scroll has always worked, before 7.05 and it has not worked with with ubuntu.

    = = = =
    Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?

  3. #3
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by Denver Dave View Post
    Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?
    You might try adding your synclient command to /etc/X11/Xsession.d/45knoppix.

    Here's how I disable my touchpad:
    Add synclient TouchpadOff=1 to /etc/X11/Xsession.d/45knoppix.
    That is, just add a line to whatever is already there.
    I do it this way because adding it to /etc/rc.local doesn't work for me.

  4. #4
    Senior Member
    Join Date
    Nov 2011
    Posts
    127
    Thanks - that fixed the touchpad vertical scroll on a permanent basis. Didn't realize how much I used the vertical scroll. Seems like a bug in 7.05 to me, since worked in previous versions.

    Note to self and others that don't have a clue:
    Tried the file manager - could not edit system files, even after selected show hidden files
    Tried sudo pcmanfm (name of file manager), didn't seem to help
    From terminal editor: sudo gedit
    added: synclient VertEdgeScroll=1; (with the above the last line in 45knoppix
    Last edited by Denver Dave; 01-18-2013 at 04:59 AM.

  5. #5
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by Denver Dave View Post
    Thanks - that fixed the touchpad vertical scroll on a permanent basis. Didn't realize how much I used the vertical scroll. Seems like a bug in 7.05 to me, since worked in previous versions.
    Glad this worked for you, Dave.

    I have no opinion on whether your problem is a bug.

    However, if you think it is, you might say so on Klaus K's site:
    http://lists.debian.org/debian-knoppix

  6. #6
    Senior Member
    Join Date
    Nov 2011
    Posts
    127
    I hadn't used knoppix for a while and I installed 7.7.1. Couldn't get my laptop scroll bar to work and I remembered this thread. Still works - thanks.

  7. #7
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by Denver Dave View Post
    I hadn't used knoppix for a while and I installed 7.7.1. Couldn't get my laptop scroll bar to work and I remembered this thread. Still works - thanks.
    Glad this worked for you, Dave.

    There is another approach which I find useful described by Klaus2008 at:
    http://knoppix.net/forum/threads/307...ight=autostart

    I now use that approach to tweak Touchpad and Caps_Lock functions.

    Best Regards.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Supermicro 2U Server 8 HD Bay 3.5 LFF E ATX Storage Chassis TQ Direct Connect picture

Supermicro 2U Server 8 HD Bay 3.5 LFF E ATX Storage Chassis TQ Direct Connect

$199.00



Asus 1U 4 Bay LFF Server 2x Intel Xeon 3.3Ghz 8C E5-2667 V2 16GB 4x1GBE No Caddy picture

Asus 1U 4 Bay LFF Server 2x Intel Xeon 3.3Ghz 8C E5-2667 V2 16GB 4x1GBE No Caddy

$200.00



Supermicro 2U Server 24 Caddy Bay 2.5 SFF E ATX Storage Chassis CSE-216A Rail 2P picture

Supermicro 2U Server 24 Caddy Bay 2.5 SFF E ATX Storage Chassis CSE-216A Rail 2P

$275.00



Storage Server Starter Kit - 2U 12 Bay Xeon 2x 2.6Ghz 8 Cores 32GB RAM HBA RAILS picture

Storage Server Starter Kit - 2U 12 Bay Xeon 2x 2.6Ghz 8 Cores 32GB RAM HBA RAILS

$369.00



HPE ProLiant EC200a Mini Server, Xeon D1518 2.2GHz CPU picture

HPE ProLiant EC200a Mini Server, Xeon D1518 2.2GHz CPU

$199.00



Dell Poweredge R410 2 X SIX CORE 2.40GHZ E5645 32GB RAM 500GB HHD SERVER QTY picture

Dell Poweredge R410 2 X SIX CORE 2.40GHZ E5645 32GB RAM 500GB HHD SERVER QTY

$159.99



Dell PowerEdge R710 2U Server 2x X5675 3.06GHZ 12-Core / 32gb / 2xTrays / Perc6i picture

Dell PowerEdge R710 2U Server 2x X5675 3.06GHZ 12-Core / 32gb / 2xTrays / Perc6i

$159.99



HYVE ZEUS V1 1U SERVER 2x XEON EIGHT CORE E5-2680 2.7GHz 16GB RAM NO HDD picture

HYVE ZEUS V1 1U SERVER 2x XEON EIGHT CORE E5-2680 2.7GHz 16GB RAM NO HDD

$144.00



Supermicro 1U Server 10 BAY SFF 2x Xeon E5-2667 v2 3.30Ghz 128GB 2x 10GBase-T picture

Supermicro 1U Server 10 BAY SFF 2x Xeon E5-2667 v2 3.30Ghz 128GB 2x 10GBase-T

$279.00



Dell PowerEdge R620 Server | 2x E5-2670 16 Cores | 96GB | H710 | 2x 600GB 10K  picture

Dell PowerEdge R620 Server | 2x E5-2670 16 Cores | 96GB | H710 | 2x 600GB 10K

$365.95