To install 7.6.1 to USB you can use the ISO without burning it to DVD and then make your flash disk installation. Using the DD command you'll don't get the necessary change from Isolinux to Syslinux.
Am i missing something? I have just downloaded ver 7.6.1, checked it's MD5 & SHA1 sums, burned to a USB drive using the DD command (inc ending with a SYNC) and then tried to boot it ... failed!! Reformatted usb, repeated & still failed. So i found and booted an olded version of Knoppix and booted that. However, the "install knoppix to flash disk" only places the running system on the pen drive. There doesn't seem to be any option to install the newer iso image i downloaded to a usb drive ... or is there?
To install 7.6.1 to USB you can use the ISO without burning it to DVD and then make your flash disk installation. Using the DD command you'll don't get the necessary change from Isolinux to Syslinux.
Many thanks Werner. I did all the "without burning it to DVD " post you suggested and all seemed to be great (intel btw) until the final command which gave:Which gave:Code:$ kvm -m 512 -cdrom $PFAD/knx/remastered.isoAnd KVM does not exist in my distro's repos's ... I think my easiest option would be to simply burn a DVD ... Thanks again.Code:bash: kvm: command not found
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 Blade Server
$39.99
DELL PowerEdge M630 Blade 2x E5-2690v4 2.6GHz =28 Cores 64GB H330 2x10Gb X520
$270.00