-
skylake system does not boot
hi.
I bought a new system recently. "ASUS H110m-C + Intel G4400". I installed WINDOWS 7 64bit, when booted then the windows could not detect usb storage devices. the system does not have optical drive, so I could not install drivers by driver DVD and by copying drivers to usb drive neither . I decided to boot KNOPPIX V7.6.1 DVD, by making a knoppix usb from the ISO with "RUFUS".The system boots the usb and "KNOPPIX" initialized, but the time when display resolution changes a blank black screen comes up and the system locks on it. When I boot my old intel based laptop everything go ok and "knoppix" boots normally.
so whats the problem?
I think that new "skylake" have problem with old software like "windows 7" and "Linux". Am I right?
any response would be appreciated?
-
Senior Member
registered user
Hi!
I have got an ASUS Z97-P mainboard with i5-4690 CPU. When I try to boot Knoppix 7.6.1 in UEFI mode I have no success. But when I use BIOS compatibility mode the Knoppix DVD boots as expected.
I think you should look inside your setup and search for a way to enable BIOS compatibility mode.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU
$349.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell EMC NX3230 Server
$599.99
Supermicro X10SRW-F Server
$169.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$105.59
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00