-
Trying to use Knoppix 7.6 DVD as rescue in Virtualbox
I am doing a linux course. On a Windows 7 PC I have installed Virtualbox. Inside Virtualbox I have CentOS 6.7 and Ubuntu.
Now is the topic rescue cd. So I have downloaded Knoppix 7.6.1. I can boot the pc with the DVD and get what I guess is the grafical UI of knoppix.
However, when I use Virtualbox and try to start the CentOS virtual machine it starts to boot from Knoppix OK but stops with:
Konnte Disk nicht nach /mnt-system mounten. Starte debugging shell:
sh: can't access tty; job control turned off
Can somebody tell me if this is supposed to work or am I trying the impossible?
Thank you and regards,
Mark
-
Is your virtual machine created as 32 bit ? I run Virtualbox 64 bit on a 64 bit Linux host, and I cannot boot Knoppix on a 32 bit virtual machine, although I specifically choose the 32 bit kernel by wriing "knoppix xkeyboard=dk" when booting. Adding no3d makes no difference. It hangs at "Booting the kernel". On a 64 bit virtual machine I can boot Knoppix 32 bit and 64 bit without problems, even without no3d.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 32GB | P204I | 2x900GB 10KRPM
$1499.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 512GB | P204I | 2x1.2TB 10KRPM
$2699.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge M620 Blade Server
$39.99