-
Trying to use Knoppix 7.6 DVD as rescue in Virtualbox
I am doing a linux course. On a Windows 7 PC I have installed Virtualbox. Inside Virtualbox I have CentOS 6.7 and Ubuntu.
Now is the topic rescue cd. So I have downloaded Knoppix 7.6.1. I can boot the pc with the DVD and get what I guess is the grafical UI of knoppix.
However, when I use Virtualbox and try to start the CentOS virtual machine it starts to boot from Knoppix OK but stops with:
Konnte Disk nicht nach /mnt-system mounten. Starte debugging shell:
sh: can't access tty; job control turned off
Can somebody tell me if this is supposed to work or am I trying the impossible?
Thank you and regards,
Mark
-
Is your virtual machine created as 32 bit ? I run Virtualbox 64 bit on a 64 bit Linux host, and I cannot boot Knoppix on a 32 bit virtual machine, although I specifically choose the 32 bit kernel by wriing "knoppix xkeyboard=dk" when booting. Adding no3d makes no difference. It hangs at "Booting the kernel". On a 64 bit virtual machine I can boot Knoppix 32 bit and 64 bit without problems, even without no3d.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 120Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge 2950 Server
$60.00
DELL R630 Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4x 1.2TB SAS 4xRJ45
$306.00
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00