Results 1 to 4 of 4

Thread: How do I get a full output of "lspci -v" ? (Can't see HDD)

  1. #1
    Junior Member
    Join Date
    Dec 2016
    Posts
    2

    How do I get a full output of "lspci -v" ? (Can't see HDD)

    Hello, I bought Knoppix USB (and am learning Linux) with a view to reformatting an old Windows 7 laptop HDD. Knoppix booted up fine from the USB stick but can't see the HDD. This might be because it can't see it, but alternateively it could simply be that I don't know where to look on the Knoppix GUI, being new to Linux. I can't see any levels "above" or "outside" the Knoppix. The laptop mouse seems to work fine.

    I see the forum instruction, for those who cannot see hardware to 'post a full output of "lspci -v" ' but I don't know what that means. Can anyone give me a reference for instructions on this point?

    Thanks for your help.

  2. #2
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    The 'lspci -v' command is run in a terminal. It will list your processors, nothing else.

    When you run GParted (from Menu > Preferences), do you see your hard drive partitions? If yes, what is the Information provided by GParted when you right-click on each of them?

  3. #3
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    This thread should rather be in General Support.



    ----
    Done!
    Last edited by Werner P. Schulz; 12-14-2016 at 05:03 PM.

  4. #4
    Junior Member
    Join Date
    Dec 2016
    Posts
    2
    Quote Originally Posted by philo View Post
    The 'lspci -v' command is run in a terminal. It will list your processors, nothing else.

    When you run GParted (from Menu > Preferences), do you see your hard drive partitions? If yes, what is the Information provided by GParted when you right-click on each of them?
    Thanks for your help philo. In fact I think your question may have made the penny drop.

    I can see the partitions just fine using GParted. There are 3 plus an "unallocated" residue of 1.34MB.
    2 show as ntfs ( "SYSTEM_DRV" ( /dev/sda1 ) and "Lenovo_Recovery" (/dev/sda3 ) )
    The other, /dev/sda2, has file system "unknown". This is 281GB and is surely the old C: that I disk-encrypted using Truecrypt. (And whose password I forgot :O )

    But I see when I right-click on any partition that amongst other options I can "Reformat to" any one of a long list of formats.

    Presumably I can just do that to the old 281GB Truecrypt partition and Reformat to (say) ext4, and then install a Linux system like ubuntu onto that partition?

    Many thanks again for your help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper EX4300-24T Layer 3 24 Ports Manageable Ethernet Switch 1 Year Warranty picture

Juniper EX4300-24T Layer 3 24 Ports Manageable Ethernet Switch 1 Year Warranty

$139.00



Juniper EX2200-C-12T-2G 12 Port L3 EX2200-C Compact Fanless Switch 1YearWarranty picture

Juniper EX2200-C-12T-2G 12 Port L3 EX2200-C Compact Fanless Switch 1YearWarranty

$154.00



Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord picture

Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord

$54.99



Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod picture

Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod

$169.00



Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch picture

Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch

$50.95



JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER picture

JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER

$315.00



Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch picture

Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch

$119.00



Juniper EX4600-40F-AFO 24 SFP+/SFP Ports 4 QSFP+ Ports Switch - Dual AC PSU picture

Juniper EX4600-40F-AFO 24 SFP+/SFP Ports 4 QSFP+ Ports Switch - Dual AC PSU

$950.00



Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested picture

Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested

$599.99



Juniper Networks SRX240 16-Port Security Gateway Firewall Appliance SRX240H picture

Juniper Networks SRX240 16-Port Security Gateway Firewall Appliance SRX240H

$47.99