Results 1 to 4 of 4

Thread: How do I get a full output of "lspci -v" ? (Can't see HDD)

  1. #1
    Junior Member
    Join Date
    Dec 2016
    Posts
    2

    How do I get a full output of "lspci -v" ? (Can't see HDD)

    Hello, I bought Knoppix USB (and am learning Linux) with a view to reformatting an old Windows 7 laptop HDD. Knoppix booted up fine from the USB stick but can't see the HDD. This might be because it can't see it, but alternateively it could simply be that I don't know where to look on the Knoppix GUI, being new to Linux. I can't see any levels "above" or "outside" the Knoppix. The laptop mouse seems to work fine.

    I see the forum instruction, for those who cannot see hardware to 'post a full output of "lspci -v" ' but I don't know what that means. Can anyone give me a reference for instructions on this point?

    Thanks for your help.

  2. #2
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    The 'lspci -v' command is run in a terminal. It will list your processors, nothing else.

    When you run GParted (from Menu > Preferences), do you see your hard drive partitions? If yes, what is the Information provided by GParted when you right-click on each of them?

  3. #3
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    This thread should rather be in General Support.



    ----
    Done!
    Last edited by Werner P. Schulz; 12-14-2016 at 05:03 PM.

  4. #4
    Junior Member
    Join Date
    Dec 2016
    Posts
    2
    Quote Originally Posted by philo View Post
    The 'lspci -v' command is run in a terminal. It will list your processors, nothing else.

    When you run GParted (from Menu > Preferences), do you see your hard drive partitions? If yes, what is the Information provided by GParted when you right-click on each of them?
    Thanks for your help philo. In fact I think your question may have made the penny drop.

    I can see the partitions just fine using GParted. There are 3 plus an "unallocated" residue of 1.34MB.
    2 show as ntfs ( "SYSTEM_DRV" ( /dev/sda1 ) and "Lenovo_Recovery" (/dev/sda3 ) )
    The other, /dev/sda2, has file system "unknown". This is 281GB and is surely the old C: that I disk-encrypted using Truecrypt. (And whose password I forgot :O )

    But I see when I right-click on any partition that amongst other options I can "Reformat to" any one of a long list of formats.

    Presumably I can just do that to the old 281GB Truecrypt partition and Reformat to (say) ext4, and then install a Linux system like ubuntu onto that partition?

    Many thanks again for your help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24 picture

Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24

$117.00



GENUINE CISCO DS-SFP-FC32G-SW SFP NEW SEALED SEE PHOTOS SHIPS FREE picture

GENUINE CISCO DS-SFP-FC32G-SW SFP NEW SEALED SEE PHOTOS SHIPS FREE

$74.99



H3C SFP-FE-T-A Compatible 100BASE-T SFP Copper RJ-45 100m -93651 picture

H3C SFP-FE-T-A Compatible 100BASE-T SFP Copper RJ-45 100m -93651

$38.00



Sonicwall 02-SSC-1874 Compatible 10GBASE-T Copper SFP+ RJ-45 30M Transceiver-876 picture

Sonicwall 02-SSC-1874 Compatible 10GBASE-T Copper SFP+ RJ-45 30M Transceiver-876

$189.05



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



Cisco 10-2415-03 SFP-10G-SR 10GBASE-SR SFP+ V03 Multi Mode Transceiver Module picture

Cisco 10-2415-03 SFP-10G-SR 10GBASE-SR SFP+ V03 Multi Mode Transceiver Module

$9.99



For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T picture

For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T

$48.59



NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping* picture

NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping*

$15.00



LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture

LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module

$89.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$18.00