Results 1 to 4 of 4

Thread: How do I get a full output of "lspci -v" ? (Can't see HDD)

  1. #1
    Junior Member
    Join Date
    Dec 2016
    Posts
    2

    How do I get a full output of "lspci -v" ? (Can't see HDD)

    Hello, I bought Knoppix USB (and am learning Linux) with a view to reformatting an old Windows 7 laptop HDD. Knoppix booted up fine from the USB stick but can't see the HDD. This might be because it can't see it, but alternateively it could simply be that I don't know where to look on the Knoppix GUI, being new to Linux. I can't see any levels "above" or "outside" the Knoppix. The laptop mouse seems to work fine.

    I see the forum instruction, for those who cannot see hardware to 'post a full output of "lspci -v" ' but I don't know what that means. Can anyone give me a reference for instructions on this point?

    Thanks for your help.

  2. #2
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    The 'lspci -v' command is run in a terminal. It will list your processors, nothing else.

    When you run GParted (from Menu > Preferences), do you see your hard drive partitions? If yes, what is the Information provided by GParted when you right-click on each of them?

  3. #3
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    This thread should rather be in General Support.



    ----
    Done!
    Last edited by Werner P. Schulz; 12-14-2016 at 05:03 PM.

  4. #4
    Junior Member
    Join Date
    Dec 2016
    Posts
    2
    Quote Originally Posted by philo View Post
    The 'lspci -v' command is run in a terminal. It will list your processors, nothing else.

    When you run GParted (from Menu > Preferences), do you see your hard drive partitions? If yes, what is the Information provided by GParted when you right-click on each of them?
    Thanks for your help philo. In fact I think your question may have made the penny drop.

    I can see the partitions just fine using GParted. There are 3 plus an "unallocated" residue of 1.34MB.
    2 show as ntfs ( "SYSTEM_DRV" ( /dev/sda1 ) and "Lenovo_Recovery" (/dev/sda3 ) )
    The other, /dev/sda2, has file system "unknown". This is 281GB and is surely the old C: that I disk-encrypted using Truecrypt. (And whose password I forgot :O )

    But I see when I right-click on any partition that amongst other options I can "Reformat to" any one of a long list of formats.

    Presumably I can just do that to the old 281GB Truecrypt partition and Reformat to (say) ext4, and then install a Linux system like ubuntu onto that partition?

    Many thanks again for your help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT picture

XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT

$59.00



IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets picture

IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets

$139.00



LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA picture

LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA

$229.99



Lot of 4 - Genuine Dell (62P9H) PERC H710 512MB Mini Blade 6Gbps SAS Raid picture

Lot of 4 - Genuine Dell (62P9H) PERC H710 512MB Mini Blade 6Gbps SAS Raid

$49.99



Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE picture

Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE

$15.98



ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs picture

ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs

$86.99



LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License picture

LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License

$35.96



LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault picture

LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault

$39.00



ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID picture

ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID

$58.99



Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5

Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD

$142.49