Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Vintage DIGI International ISA PC/2e Interface Card 30002024-02 55000461
$17.99
Vintage Seagate 9CY131-037 80GB 7200RPM SATA 3Gbps 8MB Cache 3.5" HDD
$9.95
Vintage Western Digital 40GB IDE 3.5 Hard Drive - WD400EB-11CFP0 P/N 258328-001
$19.95
Vintage Retro Computer PC Speakers LABTEC Amplified LCS-800 1993 WORKING
$47.25
Vintage WORKING HP Pavilion D5258A 13.5" VGA CRT Computer Monitor
$60.00
Vintage Aqua Turquoise 80'S Retro Street Bluetooth Wireless Streaming Boombox Re
$286.44
Vintage Lot of Thirty (30) Assorted SS/DD & DS/DD 5.25" Floppy Disks - Used
$15.00
Vintage AppleDesign Powered Speakers II M2497 Pair Power Supply Tested
$89.00
Vintage Computer Chip Gold White Ceramic Intel C1702A Static EPROM 2048-bit 1972
$65.00
Vintage White Microsoft Wheel Mouse Optical Mouse 1.1A USB & PS/2 Compatible
$12.00