-
Senior Member
registered user
Why is the partition mounted via "fromhd=..." rw?
First I boot knoppix as:
knoppix64 init 2 no3d fromhd="/dev/sdc5"
then I see
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
-
Why not read- and writable? I suppose you are using a "poor man's install.
-
Senior Member
registered user
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
-
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
AUDIO CODES MP-114 VOIP Gateway Open Box
$24.99
IXIA XR100 VOIP PROBE
$199.99
Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black
$32.00
Cisco VG202XM Analog Voice Gateway VoIP -- [NEW/FULL KIT]
$76.00
Yealink W73H IP DECT VOIP Phone
$10.00
New Cisco 7945G IP VoIP Gigabit GIGE Telephone Phone CP-7945G -
$24.95
Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945
$3.00
Yealink T54W IP Phone, 16 VoIP Accounts. 4.3-Inch Color Display - Black
$99.99
LOT OF 10 Cisco CP-7841-K9 VoIP 4-Line Business Phone w/ Stand Handset Cord
$69.99
Yealink SIP-T41P PoE Ultra Elegant VoIP Phone
$29.95