Results 1 to 4 of 4

Thread: Why is the partition mounted via "fromhd=..." rw?

  1. #1
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168

    Why is the partition mounted via "fromhd=..." rw?

    First I boot knoppix as:

    knoppix64 init 2 no3d fromhd="/dev/sdc5"
    then I see

    $ mount | grep mnt-system
    /dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)

    $ blkid | grep sdc5
    /dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Why not read- and writable? I suppose you are using a "poor man's install.

  3. #3
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168
    OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway

    Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there

    In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only



    How do you do that?



    Last edited by Albretch; 12-19-2016 at 08:03 PM.

  4. #4
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


FINISAR FTLX1471D3BTL TM SM 10KM SFP 1310NM CPRI 9.8G TRANSCEIVER picture

FINISAR FTLX1471D3BTL TM SM 10KM SFP 1310NM CPRI 9.8G TRANSCEIVER

$20.90



Genuine Intel 10Gbe FTLX1471D3BCV-IT E10GSFPLR E65689-001 for Adapter X520 X710 picture

Genuine Intel 10Gbe FTLX1471D3BCV-IT E10GSFPLR E65689-001 for Adapter X520 X710

$18.99



Cisco C3KX-NM-10G 4-Port SFP  10G Expansion Module 3750-X / 3560-X Switch picture

Cisco C3KX-NM-10G 4-Port SFP 10G Expansion Module 3750-X / 3560-X Switch

$50.00



Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP picture

Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP

$419.99



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T picture

For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T

$48.59



NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping* picture

NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping*

$15.00



GENUINE Cisco SFP-GE-T EXT 30-1421-01 USA 1000BASE-T RJ45 SFP Transceiver picture

GENUINE Cisco SFP-GE-T EXT 30-1421-01 USA 1000BASE-T RJ45 SFP Transceiver

$9.99



10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module picture

10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module

$85.00



2.5GBase-T 2.5G SFP-T to RJ45 Copper Transceiver Module For Cisco,Ubiquiti UniFi picture

2.5GBase-T 2.5G SFP-T to RJ45 Copper Transceiver Module For Cisco,Ubiquiti UniFi

$24.59