Results 1 to 4 of 4

Thread: Why is the partition mounted via "fromhd=..." rw?

  1. #1
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168

    Why is the partition mounted via "fromhd=..." rw?

    First I boot knoppix as:

    knoppix64 init 2 no3d fromhd="/dev/sdc5"
    then I see

    $ mount | grep mnt-system
    /dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)

    $ blkid | grep sdc5
    /dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Why not read- and writable? I suppose you are using a "poor man's install.

  3. #3
    Senior Member registered user
    Join Date
    Dec 2004
    Posts
    168
    OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway

    Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there

    In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only



    How do you do that?



    Last edited by Albretch; 12-19-2016 at 08:03 PM.

  4. #4
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


For Cisco SFP-GE-T, Ubiquti Transceiver 1G SFP-T 1000BASE-T Copper SFP to RJ45 picture

For Cisco SFP-GE-T, Ubiquti Transceiver 1G SFP-T 1000BASE-T Copper SFP to RJ45

$170.99



NEW Sealed Original Cisco SFP-10G-SR 10G SR SFP+ Module 850nmMM *US Shipping* picture

NEW Sealed Original Cisco SFP-10G-SR 10G SR SFP+ Module 850nmMM *US Shipping*

$18.00



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$6.90



Cisco GLC-TE 1000BASE-T SFP Copper RJ-45 100m - 01478  picture

Cisco GLC-TE 1000BASE-T SFP Copper RJ-45 100m - 01478

$24.99



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



Cisco SFP-10G-SR V03 10-2415-03 10GBASE Multimode Fiber Optic Transceiver Module picture

Cisco SFP-10G-SR V03 10-2415-03 10GBASE Multimode Fiber Optic Transceiver Module

$6.98



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.90



CISCO SFP-GE-T Copper Transceiver Module   picture

CISCO SFP-GE-T Copper Transceiver Module

$11.63



HP Aruba J9150D 10GBASE-SR SFP+ Transceiver Module 850nm 300m MMF LC picture

HP Aruba J9150D 10GBASE-SR SFP+ Transceiver Module 850nm 300m MMF LC

$65.00



For MikroTik S-RJ01 SFP transceiver RJ45 to SFP 1000Base-T Cooper SFP 100m picture

For MikroTik S-RJ01 SFP transceiver RJ45 to SFP 1000Base-T Cooper SFP 100m

$16.99