Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Vintage MediaMate Early 90’s Macintosh Mac Desktop PC Home Computer Stand #18200
$50.00
Apple Mac Powerbook Duo 230 Vintage Laptop
$60.00
Vintage Apple Macintosh II 2 M5000 Computer no power very nice w drives card
$350.00
Vintage Apple Macintosh Powerbook 190 Series M3047 Laptop Parts/Repair
$69.00
Vintage Apple Macintosh Classic Model M0420 *Powers ON
$79.99
Apple Studio Display Monitor M2454 15" vintage Mac LCD
$80.00
Apple Mac IIsi computer Very Good condition Vintage
$100.00
VINTAGE REFURBISHED MACINTOSH SE WITH BLUESCSI RECAPPED POWER SUPPLY
$300.00
Vintage Apple Power Macintosh PC Computer M3979 7600/132
$249.50
VINTAGE APPLE POWER MACINTOSH 6500/250 DESKTOP COMPUTER POWERPC BOOTS
$249.50