Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
COMMODORE 1541 FLOPPY MAINBOARD Lot not working sold as is
$75.00
Commodore SX-64 W/Rare 1541 Flash Installed READ DESCRIPTION SX64 C-64
$459.00
Commodore VIC 20 Computer In Box As Is For Parts or repair
$64.00
Commodore 128 Personal Computer C128 with Power Supply Fast Load Cartridge
$220.00
$200.00
Commodore 1084S-D 14" Color Video CRT Monitor Parts Or Repair Read Descrption
$199.99
Commodore 64 Disk Drive, Includes Cables & Manuals.
$60.00
Commodore 64 2 in 1 Diagnostic & Dead Test Cartridge Fully Assembled USA seller
$19.99
1984 Commodore home Computer Video Color Monitor Model 1702
$252.00
TeensyROM Cartridge for Commodore 64/128: MIDI, Fastload, Emulation, and Network
$65.00