Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR
$47.00
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
Cisco SG110 8 Port Gigabit Ethernet Switch SG110D-08-BR
$39.00
Cisco SG110 5 Port Gigabit Ethernet Switch SG110D-05-AU
$40.00
Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch
$18.99
New Linksys SE3005 5-port Gigabit Ethernet Switch
$15.99
NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS305) - NEW IN BOX
$18.99
*NETGEAR PROSAFE (JGS524V2) 24-Port Gigabit Ethernet Switch *NO AC*
$29.99
YuanLey 10 Port Gigabit PoE Switch With 8 Poe Unmanaged with 2 1000Mbps Uplink
$20.00
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$89.97