Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
IBM QRadar xx29 Server 4412Q2A
$419.99
IBM Power8 S822L 20-Core 3.42GHz 256Gb 1.2Tb 10GbE 2U Linux Server - 8247-22L
$519.96
$16000.00
IBM 8284-22A S822 Dual Power8 Cpu 512Gb (16x 32Gb) RAM
$795.00
IBM SYSTEM x3200 M3 Tower- Intel i3 540 @ 3.07GHz, 4GB, 500GB HHD
$125.00
IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8
$479.96
IBM SYSTEM X3200 M3 732854U Tower Server INTEL XEON X3450 2.67Ghz 4GB SEE NOTES
$49.72
IBM Power8 S822L Storage Server 8247-22L - Full of Ram, Some Cards, No HDD's
$499.95
IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W
$199.00
IBM System x3650 M4 2U 6LFF Rackmount Server 64GB 2*Xeon E5-2630 v2 2.6GHz 6C
$126.58