Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Vintage Timex Sinclair 1000 Personal Computer UNTESTED Plus 2 books.
$30.00
vintage Apple ll computing joystick 16 pin to 9 pin adapter
$12.00
BlueSCSI V2 WiFi (Narrow DB25) - Modern Storage for Vintage Computers
$51.50
Vintage Original Atari 800XL Home Personal Computer Console / Keyboard UNTESTED
$99.99
BlueSCSI V2 WiFi (Desktop) Modern Storage for Vintage Computers Latest Model
$53.50
Vintage Manhattan Data Switch And 2 Cables
$10.00
Vintage Dot Matrix Printer Contin Feed Paper 8.5 x 11. Lots of 5 to 250 sheets.
$4.00
$75.00
Vintage KAYPRO keyboard Computer
$119.99
Epson MBM-2095-E Vintage Monochrome Monitor (Does not Turn On)
$105.26