Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black
$32.00
Yealink T53W IP Phone, 12 VoIP Accounts. 3.7-Inch Display w/o Adapter - Black
$59.99
POLYCOM - VOIP POLY EDGE E350 IP PHONE #2200-87010-025
$145.00
Yealink T54W IP Phone, 16 VoIP Accounts. 4.3-Inch Color Display - Black
$99.99
Cisco CP-7841 VoIP Phone PoE IP Business Phone Great Condition Mult. Available
$19.99
CISCO CP-7925G UC PHONE CP VoIP WIRELESS PHONE W/ BATTERY, CHARGER & POWER CORD
$20.00
Grandstream DP750 DECT VoIP Base Station Black
$12.00
Lightly Used Cisco 8811 Series VoIP phone Factory Reset great condition
$21.00
Cisco SPA504G 4-Line IP Phone with 2-Port Switch, PoE, LCD Display &Power Supply
$21.00
Cisco DX650 VoIP HD Touchscreen Video Phone - Android WiFi
$45.00