Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Impulse Firecracker 24 Rev 2.1 2MB 24bit Graphics card for Amiga 2000 3000 4000
$175.00
Mini External OLED AMIGA Gotek Floppy Drive Emulator For Amiga 500/500+/600/1200
$37.41
Commodore Amiga 1080 Color Monitor Read Description
$150.00
Amiga 500 Gotek Custom Mount USB Floppy Emulator - Complete Kit with Gotek
$65.00
SIDKick Pico Commodore 64 and 128 (C64 / C128) - MOS SID 6581 / 8580 Replacement
$19.99
Commodore Amiga KKQ-E94YC Keyboard for A2000 / A2500
$249.00
Commodore Amiga 1200 A1200 PAL Motherboard Recapped Works 1D4 US Seller Refurb
$399.99
Utilities Unlimited Emplant for AMIGA A2000 A3000 A4000
$475.00
$50.00
Promqueen EPROM Programmer for Commodore VIC-20 SUPER RARE
$499.00