Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Cisco ASA5525-FTD-K9 Security Appliance with FirePower Services
$1000.00
HP T730 THIN CLIENT 8GB RAM 128GB SSD 4 port Gbe NIC GREAT FOR Firewall pfSense
$120.00
Fortinet Fortiwifi 60D FG-60D Security Appliance Firewall / VPN w/ AC Adapter
$34.97
Ubiquiti Networks USG Unifi Security Gateway Router/Firewall
$29.95
Fortinet Fortiwifi 60D FWF-60D Security Appliance Firewall Wifi VPN
$29.99
OPNsense six-port Gigabit router/firewall on Lanner FW-7535 hardware
$69.00
Cisco Meraki MX65-HW Cloud Managed Security Appliance
$45.00
PFSense F80 Firewall | Atom C2358 CPU | 4 Gigabit Ports | 2GB RAM | Fresh Reload
$75.00
Sophos SG-115 Rev 2 UTM Firewall Security Appliance 4-Port w/Power Adapter
$65.00
FORTINET FG-500D FortiGate 500D, 10xGE RJ45 ports, 8xGE SFP slots Firewall
$126.00