Greetings jhgarrison
Knoppix works around systemd as do several other Debian-derived Linuxes.
Here's a little talk on the subject by Klaus K.
https://www.youtube.com/watch?v=lDXsw2ijRkw
And welcome to the forum.
Knoppix newbie here coming from pre-systemd background on CentOS 6.
I've got 7.7.1 installed on a USB thumb drive and it boots just fine. However typical systemd tools don't seem to work.
Something as simple asfails withCode:sudo systemctl list-units. However, I do see some systemd processes running.Code:No such method 'ListUnitsFiltered'
What exactly is the init vs systemd status in Knoppix 7.7.1? Is most everything run from? Some network-related things inCode:/etc/init.dalso seem to not work, such asCode:/etc/init.d. It gives a deprecation warning but doesn't actually do anything to the network.Code:/etc/init.d/networking restart
Feeling confused...
Greetings jhgarrison
Knoppix works around systemd as do several other Debian-derived Linuxes.
Here's a little talk on the subject by Klaus K.
https://www.youtube.com/watch?v=lDXsw2ijRkw
And welcome to the forum.
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge VRTX 2x PowerEdge M630 Blade Server 512GB Ram Total w/ Rails
$1750.00
Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model
$349.00
Dell PowerEdge MX7000 CTO Blade 8 slot 7U Chassis 6x 3000W 2x MX9002m
$2399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 32GB H330 2x10Gb X520
$174.00