Greetings jhgarrison
Knoppix works around systemd as do several other Debian-derived Linuxes.
Here's a little talk on the subject by Klaus K.
https://www.youtube.com/watch?v=lDXsw2ijRkw
And welcome to the forum.
Knoppix newbie here coming from pre-systemd background on CentOS 6.
I've got 7.7.1 installed on a USB thumb drive and it boots just fine. However typical systemd tools don't seem to work.
Something as simple asfails withCode:sudo systemctl list-units. However, I do see some systemd processes running.Code:No such method 'ListUnitsFiltered'
What exactly is the init vs systemd status in Knoppix 7.7.1? Is most everything run from? Some network-related things inCode:/etc/init.dalso seem to not work, such asCode:/etc/init.d. It gives a deprecation warning but doesn't actually do anything to the network.Code:/etc/init.d/networking restart
Feeling confused...
Greetings jhgarrison
Knoppix works around systemd as do several other Debian-derived Linuxes.
Here's a little talk on the subject by Klaus K.
https://www.youtube.com/watch?v=lDXsw2ijRkw
And welcome to the forum.
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell Poweredge FC630 Blade Server BAREBONES No CPU, No HDD, No RAM
$75.00
Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k
$244.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99