Results 1 to 7 of 7

Thread: Touch pad scroll not working on knoppix 7.05

  1. #1
    Senior Member
    Join Date
    Nov 2011
    Posts
    127

    Touch pad scroll not working on knoppix 7.05

    Acer Aspire laptop 7741Z-4643 I've just created a new USB boot disk with knoppix 7.05 and the touchpad vertical scroll is either not working or it is very unreliable. On my 7.03 USB boot drive that I still have, the touchpad scroll still works fine when I boot with this drive My suspicion is that, I think there is a table that defines the touch pad location for scroll that is out of whack on 7.05 Stranglely, rarely on 7.05, the scroll, once in a great while the scroll, will work once and rotate the desktop, but can't seem to do it again. Anyone else have the same issue with the laptop touchpad scroll? Ideas? Oddly, in all previous versions of knoppix that I've tried, the touchpad vertical scroll has always worked, before 7.05 and it has not worked with with ubuntu. = = = = Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?
    Last edited by Denver Dave; 01-16-2013 at 06:30 AM.

  2. #2
    Senior Member
    Join Date
    Nov 2011
    Posts
    127
    Sorry about the run together paragraphs in the previous post, just figured out I needed to turn the noscript off for this page after I lost the ability to edit the post.

    = = = = =

    Acer Aspire laptop 7741Z-4643 I've just created a new USB boot disk with knoppix 7.05 and the touchpad vertical scroll is either not working or it is very unreliable. On my 7.03 USB boot drive that I still have, the touchpad scroll still works fine when I boot with this drive

    My suspicion is that, I think there is a table that defines the touch pad location for scroll that is out of whack on 7.05 Stranglely, rarely on 7.05, the scroll, once in a great while the scroll, will work once and rotate the desktop, but can't seem to do it again. Anyone else have the same issue with the laptop touchpad scroll? Ideas?

    Oddly, in all previous versions of knoppix that I've tried, the touchpad vertical scroll has always worked, before 7.05 and it has not worked with with ubuntu.

    = = = =
    Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?

  3. #3
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by Denver Dave View Post
    Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?
    You might try adding your synclient command to /etc/X11/Xsession.d/45knoppix.

    Here's how I disable my touchpad:
    Add synclient TouchpadOff=1 to /etc/X11/Xsession.d/45knoppix.
    That is, just add a line to whatever is already there.
    I do it this way because adding it to /etc/rc.local doesn't work for me.

  4. #4
    Senior Member
    Join Date
    Nov 2011
    Posts
    127
    Thanks - that fixed the touchpad vertical scroll on a permanent basis. Didn't realize how much I used the vertical scroll. Seems like a bug in 7.05 to me, since worked in previous versions.

    Note to self and others that don't have a clue:
    Tried the file manager - could not edit system files, even after selected show hidden files
    Tried sudo pcmanfm (name of file manager), didn't seem to help
    From terminal editor: sudo gedit
    added: synclient VertEdgeScroll=1; (with the above the last line in 45knoppix
    Last edited by Denver Dave; 01-18-2013 at 04:59 AM.

  5. #5
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by Denver Dave View Post
    Thanks - that fixed the touchpad vertical scroll on a permanent basis. Didn't realize how much I used the vertical scroll. Seems like a bug in 7.05 to me, since worked in previous versions.
    Glad this worked for you, Dave.

    I have no opinion on whether your problem is a bug.

    However, if you think it is, you might say so on Klaus K's site:
    http://lists.debian.org/debian-knoppix

  6. #6
    Senior Member
    Join Date
    Nov 2011
    Posts
    127
    I hadn't used knoppix for a while and I installed 7.7.1. Couldn't get my laptop scroll bar to work and I remembered this thread. Still works - thanks.

  7. #7
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by Denver Dave View Post
    I hadn't used knoppix for a while and I installed 7.7.1. Couldn't get my laptop scroll bar to work and I remembered this thread. Still works - thanks.
    Glad this worked for you, Dave.

    There is another approach which I find useful described by Klaus2008 at:
    http://knoppix.net/forum/threads/307...ight=autostart

    I now use that approach to tweak Touchpad and Caps_Lock functions.

    Best Regards.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W picture

H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W

$2512.18



Dell R730xd 12LFF 2.6Ghz 20-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails picture

Dell R730xd 12LFF 2.6Ghz 20-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails

$721.05



Dell PowerEdge R640 Server 2x Gold 6150 2.70Ghz 36-Core 256GB 2x 960GB SSD H730P picture

Dell PowerEdge R640 Server 2x Gold 6150 2.70Ghz 36-Core 256GB 2x 960GB SSD H730P

$1737.25



H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 512GB RAM 8x25G NIC 2x2200W picture

H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 512GB RAM 8x25G NIC 2x2200W

$2888.18



Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB picture

Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB

$510.00



DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45

$275.00



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$224.99



Dell PowerEdge R430 3.5 1U 2x E5-2690 v3 2.6ghz 24-Cores 256gb 4x Trays 2x 550w picture

Dell PowerEdge R430 3.5 1U 2x E5-2690 v3 2.6ghz 24-Cores 256gb 4x Trays 2x 550w

$289.99



HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45 picture

HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45

$355.00