Results 1 to 7 of 7

Thread: touchpad tapping mod

  1. #1
    Junior Member
    Join Date
    Jan 2017
    Posts
    2

    touchpad tapping mod

    This problem has been addressed on this forum before but I can't make the answer work. Touchpad tapping is not enabled by default, but 'synclient TapButton1=1' from a console at run level 5 enables it. It does not work from run level 2 because that is not a graphical environment. In order to make the change permanent the advice is to go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content : synclient "TapButton1=1". The problem is that the file system is mounted read-only and chmod doesn't work. You can't find the file on the unmounted flash drive. How can you get this line in Xsession.d?

  2. #2
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    Did you try this command in a terminal:

    Code:
    sudo leafpad /etc/X11/Xsession.d/15x11-synaptics

  3. #3
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Greetings was698002 and welcome to the forum.

    All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
    However, one file, 45knoppix, is owned by root and also executable.

    I add a synclient command to this file, at its end, to tweak my touchpad.
    This is slightly simpler than adding a new file just for this one tweak.

    Quote marks are not necessary for the command.

    Of course, you'll need to have persistence working for this to make a permanent
    change to your system.

  4. #4
    Junior Member
    Join Date
    Jan 2017
    Posts
    2

    SOLVED -thanks

    Works fine on 7.7.2 despite the file description as an anachronistic holdover. Never would have found it without you. thanks.


    Quote Originally Posted by utu View Post
    Greetings was698002 and welcome to the forum.

    All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
    However, one file, 45knoppix, is owned by root and also executable.

    I add a synclient command to this file, at its end, to tweak my touchpad.
    This is slightly simpler than adding a new file just for this one tweak.

    Quote marks are not necessary for the command.

    Of course, you'll need to have persistence working for this to make a permanent
    change to your system.

  5. #5
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by was698002 View Post
    Works fine on 7.7.2 ... thanks.
    Was not aware of 7.7.2, but glad it works for you.
    The old forum record harks back to when I thought /etc/rc.local should work, and it didn't.

  6. #6
    Junior Member
    Join Date
    Mar 2012
    Location
    Brisbane, Australia
    Posts
    16
    The lack of touchpad support is the one single frustrating thing about Knoppix.
    What is persistence mode and how does one achieve it?
    Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably
    Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?

  7. #7
    Member registered user
    Join Date
    Mar 2010
    Location
    USA
    Posts
    50
    Quote Originally Posted by wspc View Post
    The lack of touchpad support is the one single frustrating thing about Knoppix. What is persistence mode and how does one achieve it? Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?
    in 7.7.1 the program you are asking about in in a package called gpointing-device-settings. If you install that you will have control of it via GUI. The persistence stuff is covered in http://knoppix.net/forum/threads/319...th-persistence

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module picture

Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module

$279.97



Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch picture

Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch

$499.00



Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack picture

Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack

$140.00



Cisco Nexus N9K-C93108TC-EX 48-Port 10G RJ-45 6x100G QSFP Network Switch W/Ears picture

Cisco Nexus N9K-C93108TC-EX 48-Port 10G RJ-45 6x100G QSFP Network Switch W/Ears

$499.99



Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture

Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850

$30.99



Cisco SFP-10G-SR 10-2415-03  10 Gigabit Transceiver   LOT OF 10   @ C picture

Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 10 @ C

$39.99



Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850 picture

Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850

$124.90



CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC  10G 10GB SFP - 1 Year Warranty picture

CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC 10G 10GB SFP - 1 Year Warranty

$39.99



Cisco Nexus 9300 N9K-C9372PX 48-Port SFP 10G 6-Port QSFP 40G Network AFI Switch picture

Cisco Nexus 9300 N9K-C9372PX 48-Port SFP 10G 6-Port QSFP 40G Network AFI Switch

$150.00



Cisco Nexus N9K-C9372TX 48P 10G Gigabit Ethernet 6x QSFP+ 40G Switch 2x650W PSU picture

Cisco Nexus N9K-C9372TX 48P 10G Gigabit Ethernet 6x QSFP+ 40G Switch 2x650W PSU

$199.99