Results 1 to 7 of 7

Thread: touchpad tapping mod

  1. #1
    Junior Member
    Join Date
    Jan 2017
    Posts
    2

    touchpad tapping mod

    This problem has been addressed on this forum before but I can't make the answer work. Touchpad tapping is not enabled by default, but 'synclient TapButton1=1' from a console at run level 5 enables it. It does not work from run level 2 because that is not a graphical environment. In order to make the change permanent the advice is to go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content : synclient "TapButton1=1". The problem is that the file system is mounted read-only and chmod doesn't work. You can't find the file on the unmounted flash drive. How can you get this line in Xsession.d?

  2. #2
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    Did you try this command in a terminal:

    Code:
    sudo leafpad /etc/X11/Xsession.d/15x11-synaptics

  3. #3
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Greetings was698002 and welcome to the forum.

    All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
    However, one file, 45knoppix, is owned by root and also executable.

    I add a synclient command to this file, at its end, to tweak my touchpad.
    This is slightly simpler than adding a new file just for this one tweak.

    Quote marks are not necessary for the command.

    Of course, you'll need to have persistence working for this to make a permanent
    change to your system.

  4. #4
    Junior Member
    Join Date
    Jan 2017
    Posts
    2

    SOLVED -thanks

    Works fine on 7.7.2 despite the file description as an anachronistic holdover. Never would have found it without you. thanks.


    Quote Originally Posted by utu View Post
    Greetings was698002 and welcome to the forum.

    All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
    However, one file, 45knoppix, is owned by root and also executable.

    I add a synclient command to this file, at its end, to tweak my touchpad.
    This is slightly simpler than adding a new file just for this one tweak.

    Quote marks are not necessary for the command.

    Of course, you'll need to have persistence working for this to make a permanent
    change to your system.

  5. #5
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by was698002 View Post
    Works fine on 7.7.2 ... thanks.
    Was not aware of 7.7.2, but glad it works for you.
    The old forum record harks back to when I thought /etc/rc.local should work, and it didn't.

  6. #6
    Junior Member
    Join Date
    Mar 2012
    Location
    Brisbane, Australia
    Posts
    16
    The lack of touchpad support is the one single frustrating thing about Knoppix.
    What is persistence mode and how does one achieve it?
    Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably
    Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?

  7. #7
    Member registered user
    Join Date
    Mar 2010
    Location
    USA
    Posts
    50
    Quote Originally Posted by wspc View Post
    The lack of touchpad support is the one single frustrating thing about Knoppix. What is persistence mode and how does one achieve it? Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?
    in 7.7.1 the program you are asking about in in a package called gpointing-device-settings. If you install that you will have control of it via GUI. The persistence stuff is covered in http://knoppix.net/forum/threads/319...th-persistence

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R620 Server | 2x 2680 V2 2.8GHz = 20 Cores | 96GB | 2x 1TB SAS picture

Dell PowerEdge R620 Server | 2x 2680 V2 2.8GHz = 20 Cores | 96GB | 2x 1TB SAS

$338.99



HP Proliant DL360p G8 Server - 2x 2680V2 2.8GHz 20 Cores - Choose RAM / Drives picture

HP Proliant DL360p G8 Server - 2x 2680V2 2.8GHz 20 Cores - Choose RAM / Drives

$248.00



Dell PowerEdge R720 Server | 2x E5-2650 v2 = 16 Cores | 128GB RAM | 4x Trays picture

Dell PowerEdge R720 Server | 2x E5-2650 v2 = 16 Cores | 128GB RAM | 4x Trays

$286.99



Dell PowerEdge R720 Server | 2x 2690 V2 - 3.0GHz - 20 Cores | 128GB | 4TB SAS picture

Dell PowerEdge R720 Server | 2x 2690 V2 - 3.0GHz - 20 Cores | 128GB | 4TB SAS

$573.99



HYVE ZEUS V1 1U SERVER 2x 10 CORE E5-2670V2 2.5GHz 32GB RAM RAIL NO HDD picture

HYVE ZEUS V1 1U SERVER 2x 10 CORE E5-2670V2 2.5GHz 32GB RAM RAIL NO HDD

$142.00



HPE ProLiant EC200a Mini Server, Xeon D1518 2.2GHz CPU picture

HPE ProLiant EC200a Mini Server, Xeon D1518 2.2GHz CPU

$159.00



Dell PowerEdge R620 Server | 2x E5-2650 V2 2.6GHz =16 Cores | 32GB | 2x trays picture

Dell PowerEdge R620 Server | 2x E5-2650 V2 2.6GHz =16 Cores | 32GB | 2x trays

$145.99



Supermicro 1U Server 10 BAY SFF 2x Xeon E5-2667 v2 3.30Ghz 128GB 2x 10GBase-T picture

Supermicro 1U Server 10 BAY SFF 2x Xeon E5-2667 v2 3.30Ghz 128GB 2x 10GBase-T

$275.00



HP ProLiant DL380 Gen9 Server Xeon E5-2620 v3 | 64GB DDR4 RAM | NO DRIVES picture

HP ProLiant DL380 Gen9 Server Xeon E5-2620 v3 | 64GB DDR4 RAM | NO DRIVES

$279.99



Dell PowerEdge R720 Server | 2x 2670 V2 =20 Cores | 32GB | H710P | 4x 300GB SAS picture

Dell PowerEdge R720 Server | 2x 2670 V2 =20 Cores | 32GB | H710P | 4x 300GB SAS

$211.99